Trailer Hitch Installation - 2008 Mazda 5- Video
Today we are going to be installing Draw-Tite part number 24773 on a 2008 Mazda 5. OK, we are underneath the vehicle, and we are going to go ahead and point out the mounting locations for the trailer hitch. You can see the tow hook here at the bottom of the spare tire well. That is going to provide one of the attaching points. And then here at the bottom side of the bumper there are two smaller-diameter holes that we actually are going to enlarge a half-inch. And we are going to feed carriage bolts and blocks from the ends of the frame down and through these holes that we have enlarged. When drilling through the bumpers on this particular vehicle and a lot of other Ford and Mazda products, the metal is very hard to drill through with a standard drill bit. It definitely helps to use a rotobroach-type of a bit to get through there. If you do not have a slower electrical drill, use a hand-held one and set it on low setting, because that slows it down. Because the problem is it heats up awfully fast and then it will actually want to burn through the metal as opposed to drilling it. So those two items will definitely make the drilling a lot easier. more
3/27/2009 1:14:46 PM
