Trailer Hitch Installation - 2007 Jeep Compass - Curt- Video
Today on our 2007 Jeep Compass we're going to be installing the Curt Trailer Hitch Receiver part number 13548. Here's what our hitch looks like installed on our vehicle. We'll go ahead and give you a couple measurements in helping you choose some accessories for your hitch such as a ball mount, a bicycle rack or a cargo carrier. From the center of the hitch pin hole to the outer most edge of the bumper is approximately 5 and 1/2 inches. From the top of the opening in the receiver to the ground is approximately 13 and 3/4 inches. Before we begin our installation, let's go over the tools that we're going to use to install our hitch today. You'll need a safety strap to help support your exhaust, little bit of spray lubricant, large pry bar, couple 3/4 inch wrenches, 3/4 inch socket and a torque wrench. Now that we've gone over our tools, lets go ahead and begin our installation. We're going to begin our installation here underneath the vehicle and we're going to need to put a safety strap to help support our exhaust. more
11/4/2014 10:53:02 AM
