Draw-Tite Max-Frame Trailer Hitch Installation - 2015 Infiniti QX60- Video
Rob here at etrailer.com and today you're going to be taking a look at the Draw-Tite custom fit to trailer hitch receiver on our 2015 Infiniti QX60. So here's what our hitch looks like once we have it installed. The cross tube is going to sit right below the bumper, but sits pretty close to the body here, but it is going to be visible right here in the center. We are going to get that two inch by two inch receiver tube opening which gives us a really wide variety of options for accessories we want to mount up. Whether we want to take a couple bikes with us and put a bike rack in there. We've got some camping gear we want to keep out of our Infiniti we can put a cargo carrier on there or even a ball mount to pull a trailer.The way you're going to mount any accessory is to the hitch fin hole here on the side. more
5/10/2019 12:02:28 PM
Curt Trailer Hitch Installation - 2015 Infiniti QX60- Video
Proud here, at etrailer.com and, today, you're going to be taking a look at the Curt Class 3, custom fit, Trailer Hitch Receiver, on our 2015 Infiniti QX60. Now, this is what our hitch is going to look like, once we have it installed and you can see it's going to have a really clean, factory look to it because the cross tube is going to be completely hidden behind the bumper and all we're going to see is that receiver tube sticking out.Since our hitch is a class 3, it's going to give us a 2" x 2" receiver tube opening and have the most available options when it comes to accessories that we can mount up. Now, the way we're going to mount all of our accessories, so the hitch pin hole here on the side. Our hitch is going to accept a standard 5/8 pin and clip. Now these are not included with the kit, but you can pick them up here at etrailer.com.Now, if you do plan on doing some towing, we had to have somewhere to hook up our safety chains. We're going to have a plate style, it's going to roll into the bottom of the receiver tube here and you can see we'll have plenty of room to get most sized hooks on or off, but with some of the smaller hooks, you do want to come from the front because we'll run out of room because of the flange here.Now, when you're looking for a hitch, you want to make sure that it's going to be up for the task, no matter what we're doing with it. more
5/9/2019 5:27:28 PM
Best 2015 Infiniti QX60 Hitch Options- Video
Today we're going to be taking a look at the best hitch options available for the 2015 Infiniti QX60. Here we have our CURT Class 3. Part number here is C13126. We're going to follow that up with our Draw-Tite. This is also a Class 3, part number 76031. Now both of our Class 3 hitches are going to offer us the 2" by 2" receiver tube opening. Now that's going to make these an extremely versatile hitch. more
4/3/2017 3:39:21 PM
