Draw-Tite Max-FrameTrailer Hitch Installation - 2018 Hyundai Santa Fe- Video
Today on our 2018 Hyundai Santa Fe, we're going to be taking a look at and showing you how to install the Draw-Tite Class III custom fit trailer hitch receiver. So here's what our hitch is going to look like once we have it installed. It's pretty much going to be hidden behind the bumper, and when we have the cover off, all we're going to see is the receiver tube sticking out. What was really unique and nice is the fact that we can actually replace that cover so that our vehicle will look completely stock and we're not going to have anything distracting or taking away from the looks of our Santa Fe.Our hitch is going to give us a 2" x 2" receiver tube opening, so we're going to really wide variety of options when it comes to accessories that we can mount up. Now the way we're going to mount all of our accessories is through the hitch pin hole here on this side. It is going to accept a standard 5/8" pin and clip; now these are not included in the kit, but you can pick them up here at etrailer.com.Now the secondary hole that's towards the opening on our receiver tube, that's going to be exclusively for the J-pin stabilization device. more
4/3/2019 5:02:14 PM
Curt Trailer Hitch Installation - 2018 Hyundai Santa Fe- Video
Today on our 2018 Hyundai Santa Fe we're gonna be taking a look at, and showing you how to install the Curt class 3 custom fit trailer hitch receiver. The hitch on our Santa Fe's gonna be completely hidden behind this appearance panel here. We can remove it, and our receiver tube will be ready for us right there. It's really nice that the hitch is gonna be hidden behind there, 'cause it's not gonna be distracting, taking away from the looks of our Santa Fe, or have anything hanging down below the bumper.Our hitch is a class 3, which means it's gonna give us a two inch by two inch receiver tube opening, and have a lot of different options for any kind of accessory that we wanna mount up. The way we're gonna mount any of our accessories is the hitch pin hole here on the side. It is gonna accept a standard 5/8 pin and clip. more
1/28/2019 1:37:13 PM
etrailer.com Trailer Hitch Installation - 2018 Hyundai Santa Fe- Video
Today on our 2018 Hyundai Santa Fe, we're gonna be installing etrailer.com's Class III 2" trailer hitch receiver, part number E98841. Now this is what our hitch is gonna look like when it's installed. As you can see, the cross tube is gonna be visible, but it's tucked back pretty nicely. So from standing ground, you're really only gonna notice the receiver tube.This is a Class III 2" x 2" hitch receiver, so it's gonna be great for all your towing needs, from bike racks, cargo carriers, to trailers. It'll handle just about anything. It uses a 5/8" hitch pin and clip. more
12/20/2018 1:42:35 PM
Best 2018 Hyundai Santa Fe Trailer Hitch Options- Video
Speaker 1: Today on our 2018 Hyundai Santa Fe Sport we'll be having a look at our best trailer hitch options. We have three different hitches here today that fit the Santa Fe Sport. If you have a different model such as the GLS or the Limited, we do have different hitches available for those two vehicles. Feel free to check out our website and find the appropriate one for those models.Up top we have the etrailer.com Class 3 hitch. Below that we have the CURT Class 3 hitch. At the bottom we have the Draw-Tite Class 3 hitch. more
10/16/2018 12:48:12 PM
Trailer Hitch Installation - 2018 Hyundai Santa Fe - Curt- Video
Speaker 1: Today on our 2018 Hyundai Santa Fe, we're going to be installing a Class-3, 2-inch Curt Trailer Hitch Receiver with part number C13152. And this is what it's going to look like once you get it installed. Most of it's going be tucked up underneath, but there is still going to be some of it visible on the outside.It has a five-eighths inch hitch pin hole, and a hitch pin and clip, which is not included, but can be picked up on our website with part number PC3. It is a plate style safety chain loop, so it's going to be quite wide, although it is a little thicker, but you should still be able to use your safety chains at just about any angle.It also features a reinforced collar. It is a 6,000 pound gross trailer weight, which is the weight that it pulls behind it, and a 900 pound tongue weight, which is the force going down on your receiver hitch tube. It also works with weight distribution systems, and while utilizing one, it increases the gross trailer weight rating to 8,000 pounds, while the tongue weight rating remains the same at 900 pounds.And now I'm going to give you some measurements to help you on deciding on accessories, such as ball mounts, bike racks and cargo carriers. more
12/14/2017 4:37:59 PM
Trailer Hitch Installation - 2018 Hyundai Santa Fe - Draw-Tite- Video
Speaker 1: Today in our 2018 Hyundai Santa Fe, we're gonna be installing a two inch, class three, Draw-Tite, max-frame trailer hitch receiver. Part number 75772 and this is what the hitch is gonna look like once you get it installed. It's gonna be pretty well tucked up on the sides but it's still gonna be a little bit visible here at the back center.One of the nice things that sets us apart from other hitches is the mounting location for your trailer wiring. It has a 5/8 inch hitch pin hole and a hitch pin and clip, which is not included but can be picked up on our website with part number PC3.The hole here is for the J-pin stabilization device, which can lock in your favorite accessories and hold them tight and rattle free and you can find that J-pin here at etrailer.com.It has a plate style safety chain holder. It's extra wide and has plenty of room to get varying sized safety chains in just about any location. It also has a reinforced collar.The gross trailer weight rating for this hitch is 3500 pounds, which is the weight being pulled behind it. more
12/14/2017 4:37:41 PM
Trailer Hitch Installation - 2018 Hyundai Santa Fe - Curt C12113- Video
Speaker 1: Today on our 2018 Hyundai Santa Fe, we're gonna be installing the Class Two Inch and a Quarter, Curt Trailer Hitch Receiver, part number C12113. This is what our hitch looks like when it's fully installed. The receiver tube is mostly tucked up under the bumper. There's small portions that stick below, but are pretty unnoticeable from behind the vehicle.This is a Class Two hitch which would be good for inaudible 00:00:22, bike racks, and cargo carriers. It's a half-inch hitch pin hole and a hitch pin and clip is included. It has plate style safety chain loops which are extra wide and very easy to put your chain loop on. more
12/14/2017 4:37:25 PM
Trailer Hitch Installation - 2018 Hyundai Santa Fe - Draw-Tite 36536- Video
Speaker 1: Today on our 2018 Hyundai Santa Fe Sport, we're going to be installing the Draw-Tite Trailer Hitch Receiver, class two, 1-1/4", with part number 36536.Now, this is what our hitch looks like when it's installed. It's still going to be visible from the bottom, although a lot of it's going to be tucked up underneath.This is a class two hitch. It has a 1/2" pin opening, which does not come with the hitch, but is available on our website with part number PC2. This is going to have a loop style safety chain holder, which is going to make it easy to install your safety chains at any angle. It has a welded on plate at the top for extra reinforcement, and also a reinforced collar.It has a 3,500 pound towing capacity, which is the weight that it pulls behind it and a 300 pound tongue weight, which is the weight pressing down on the receiver hitch.Now, I've got a few measurements to help you in deciding on accessories such as ball mounts, bike racks and cargo carriers. From the center of the hitch pin hole to the rear bumper, it's going to be about 5-1/2". more
12/14/2017 4:37:08 PM
