Trailer Hitch Installation - 2009 Ford Taurus - Curt- Video
Today, in our 2009 Ford Taurus, we'll be installing the curved trailer hitch, part number 13542. This is what the hitch looks like installed. Now, I'll give you some measurements to help you pick out accessories, like ball mounts, bike racks and cargo carriers. For the center of the hitch pinhole to the outermost edge of the bumper is 5 inches. From the top of the receiver tube to the ground, is 13 and 1/4 inches. Now, I'll show you how to install the hitch. The first step to installing our hitch will be to lower the exhaust. more
8/23/2014 12:08:06 PM
Trailer Hitch Installation - 2009 Ford Taurus - Hidden Hitch- Video
Today, on our 2009 Ford Taurus, we will be installing the Hidden Hitch Trailer Hitch, Part Number 87108. Here's what the hitch looks like installed. Now, I'll give you some measurements to help you choose accessories like ball mounts, cargo carriers or bike racks. From the top of the receiver tube to the ground, it's 13 and 1/4 inches and from the center of the hitch pinhole to the outside edge of the bumper is 4 inches. Now, we'll show you how to install it. To start the installation, we'll need to remove the exhaust of the vehicle. We'll start by adding a safety strap to keep the exhaust from falling away. We'll now remove two exhaust hangers towards the rear of the car. more
8/11/2014 4:32:09 PM
Trailer Hitch Installation - 2009 Ford Taurus- Video
Today on this 2009 Ford Taurus, we're going to be installing Draw-Tite hitch part number 36360 and this installation will also apply to Hidden Hitch part number 90090. Ok before we get started with our installation, we're going to go ahead and give you a couple of final installed dimensions which will help make choosing your hitch accessories a little bit easier. For the top of the receiver tube opening to the ground is going to measure 12 inches and from the center of the pinhole to clear the rear edge of the bumper is going to measure approximately 5 inches. Ok now we'll go ahead and move on to our installation. All right, starting off up beneath the vehicle, the first thing we need to do over here on the driver side of the frame is go ahead and lower down our exhaust system. We're going to go ahead and remove the hanger from the frame rail. more
12/15/2011 10:49:47 PM
