Trailer Hitch Installation - 2006 Ford F-150 - Curt- Video
Today on this 2006 Ford F150 Super Cab, we are going to install part number C13365. This is the Curt Class 3 2 inch receiver hitch. This is what your hitch looks like once installed. Next we'll give you some measurements to help out in searching some accessories such as a ball mount, a bicycle rack or a cargo carrier. From the top of the receiver opening down to the ground it will be 17 inches and from the center of the hitch pin hole to the outside edge of the bumper will be about 2 1/4 inches. Also, in this case the hitch also when pass to the edge of the bumper by about a 1/4 of an inch. Now we'll go ahead and show you how the hitch is installed. more
12/15/2014 1:39:00 PM
Trailer Hitch Installation - 2006 Ford F-150- Video
Today on this 2006 Ford F-150 we're going to be installing Draw-Tite Hitch part number 75506 and this installation will also apply to the Hidden Hitch part number 87418. Before we get started with our hitch installation we are going to show you a couple final install dimensions, which are going to help make choosing your hitch accessories a little bit easier. From the top of the receiver tube opening to the ground is going to measure 17-1/2 inches, and from the center of the pin hole to the clear the rear edge of the bumper is going to measure right at 3 inches, and now we will go ahead and move on to installation. We're up under the vehicle and the first thing I have done is go ahead and lower down the spare tire to give us some extra working room. Starting over here on the drivers side of the vehicle, the F-150 has a bumper reinforcement that's attached to the bumper and the frame. more
10/13/2011 10:21:15 AM
