Trailer Hitch Installation - 2007 Dodge Caravan - Curt- Video
Today on our 2007 Dodge Grand Caravan we're going to be taking a look at and installing the CURT class three trailer hitch receiver, part number C13362. This hitch is for Caravans without stow-and-go seating. What I like most about this hitch is how far it comes out and how easy everything is here to access around the receiver tube, so it should be easy to get any pins or hitch locks or anything like that on and off, and getting your accessories shouldn't be a problem mounted on the hitch. As you can see, everything's pretty well hidden away except for the receiver tube and safety chain connections right here. This does come out plenty far to make sure that it's going to give you plenty of room with just about any accessory that you may want to mount in here. You shouldn't really need to worry about clearance to the rear of your vehicle. Features the 2" by 2" receiver tube opening with a nice reinforcement collar around it that helps give it a clean look but also makes it nice and sturdy. more
9/13/2016 11:32:16 AM
Trailer Hitch Installation - 2007 Dodge Caravan - Draw-Tite- Video
Today on our 2007 Dodge Grand Caravan were going to be taking a look at, and installing the Draw-Tite Max-Frame Class III Trailer Hitch Receiver, part number 75119. What I like most about this hitch is how it comes out, and it does maintain a pretty good look on the vehicle overall, but more importantly its going to give you very good usability of the hitch. As you can see, is nicely tucked up to the underside of the fascia here to where it should give you plenty of ground clearance. You can see the round cross tube all the way across on both sides. This is a nice, heavy duty hitch. Its got the 2 x 2 receiver tube opening with this nice welded on reinforcement collar around it. more
9/13/2016 11:32:05 AM
Trailer Hitch Installation - 2007 Dodge Caravan - Draw-Tite 36296- Video
Today on our 2007 Dodge Grand Caravan we're going to be taking a look at and installing the Draw-Tite class two trailer hitch receiver, part number 36296. What I like most about this hitch is that it's pretty well hidden because really this is just about all that you see. It's going to do a really good job of making sure that you've got good accesibility and usability with this hitch while remaining fairly hidden. The main thing that you're going to see here is just the receiver tube and the safety chain connection points. This receiver tube is 1-1/4" by 1-1/4" with welded-on reinforcement collard around it. The safety chain connections are the rolled steel loops that are welded to the underside of the receiver tube. Features the 1/2" hitch pinhole in order to secure all the accessories. more
9/13/2016 11:31:57 AM
