Trailer Hitch Installation - 2010 Dodge Caliber - Hidden Hitch- Video
Today on our 2010 Dodge Caliber well be installing hidden hitch, part number 60832. This is what our hitch will look like once its installed. Next well go ahead and give you a couple of measurements to assist you with selecting accessories for your new hitch. From the center of the hitch pin hole to the outer most edge of the bumper is six inches. From the top of the receiver tube to the ground is 12 and a quarter inches. This will assist you with selecting accessories such as a bike rack or a cargo carrier. more
10/5/2012 12:23:34 PM
Trailer Hitch Installation - 2010 Dodge Caliber- Video
Today on this 2010 Dodge Caliber we are going to be installing Draw-Tite Hitch part number 24769. Before we get started with our installation we are going to go ahead and show you a couple of the final installed dimensions which are going to help make choosing your hitch accessories a little bit easier. From the top of the receiver tube opening to the ground is going to measure 14", and from the center of the pin hole to clear the rear edge of the bumper is going to measure right at 6-1/2", and now we will go ahead and move on to our installation. Okay so we are up underneath the vehicle, and we want to go ahead and locate the hole that we are going to be using to mount the hitch to the vehicle. Starting over here on the drivers side, we are actually looking at the outboard side towards the end of the frame here, and if you see there are two holes here, and these holes actually pass all the way through the frame we will be using each one of those as our attaching points for our trailer hitch and that's actually going to be the same on the passengers side as well. What we are going to be doing is taking the provided 5/8 bolts here and inserting all the way through the holes, and the hitch will actually attach on the inboard side of the frame. more
12/6/2011 7:21:57 AM
