Best 2020 Chevrolet Traverse Trailer Hitch Options- Video
Hey, everyone. Ryan here at etrailer. Today, we're gonna be checking out some of our best trailer hitch options for your 2020 Chevy Traverse. We're looking at three different trailer hitches today. Right here, this one is made by etrailer.com. This one is made by CURT and this one is made by Draw-Tite. more
5/7/2024 2:04:32 PM
etrailer Class III Trailer Hitch Installation - 2020 Chevrolet Traverse- Video
Hey everybody, Ryan here at etrailer. Today on our 2020 Chevy Traverse, we're gonna be showing you how to install the etrailer.com trailer hitch receiver. But before we do that, why don't we take a minute and check this out and see if it's the right hitch for you. Right off the bat, probably one of the best things about this setup is that the hitch is gonna hide behind the bumper 'cause this come with this factory panel here. So when you're using it, obviously you pop this off and when you're done, this can still fit the back in place. That'll snap back in there and lock it down and then it looks completely factory. more
7/27/2022 9:32:50 AM
Curt Trailer Hitch Installation - 2020 Chevrolet Traverse- Video
Hello, everybody. Clayton here at etrailer.com. Here at etrailer.com, we install, test fit, and review a lot of different products to help you as the customer make a more educated decision. And today I have a 2020 Chevrolet Traverse. We'll be taking a look at and I'll show you how to install the CURT class three trailer hitch receiver. You might be wanting to add a hitch to your Traverse to carry a bike rack, cargo carrier, or to tow a trailer. more
10/28/2020 9:47:44 AM
Curt Trailer Hitch Installation - 2020 Chevrolet Traverse C13380- Video
Ryan: Hey everybody. Ryan here at etrailer.com. So now on our 2020 Chevrolet Traverse, we're going to be taking a look at and showing you how to install the Curt Class III 2-Inch Trailer Hitch Receiver. Now the main difference with this hitch compared to some of the other ones out there is that this one is going to be for the most part completely visible. You're going to be able to see the cross tube as well as your receiver tube opening, but the cross tube does sit pretty far underneath the bumper and holds up pretty tight against the bottom of it, so it's really not going to be all that noticeable or at least stand out all that much.Now if you're looking for something that's completely hidden, there is a hitch available that sits behind the bumper. You would take this little access panel off and your receiver tube opening would be behind it, but at the end of the day it's really just your personal preference and what you're looking for as far as the appearance goes.And one of the things I really like about this hitch is how easy it's going to be to get to whenever you need to use it. more
2/14/2020 8:17:40 AM
Draw-Tite Max-Frame Trailer Hitch Installation - 2020 Chevrolet Traverse- Video
Rob: Everybody, Rob here at etrailer.com and today we're going to be taking a look at the Draw-Tite Class III Custom Fit Trailer Hitch Receiver on our 2020 Chevrolet Traverse.Now our hitch is actually going to be behind this panel right here, so when we're not towing, we can have a really clean factory look for our Traverse, we're not going to have a big old hitch sticking out. But when we do want to use it, we just loosen up the two knobs here on the bottom, and pull the panel out, and we'll have access to our hitch, we can put any kind of hitch mounted accessories in there.But then we need to make room on the inside of our Traverse, we have cargo carrier back here, loaded up with gear, making more room. Or if we want to hit the trails, we could put a bike rack in there, carry some bikes with us, or clearly we can use the hitch to tow a trailer.Now our hitch is going to be a Class III, which means it's going to give us that two inch by two inch receiver tube opening and have the widest variety of accessories available that we can mount up. Now regardless of what kind of accessory you're going to be using, they're all going to mount the hitch pin hole here on the side. Our hitch is going to accept a standard inaudible 00:01:07 pin and clip. Now these are not going to come with the hitch, but you can find them here at etrailer.com, along with some locking devices to make sure your accessories are secure, or anti rattle devices to cut down on that rattling noise when we're driving down the road.But if you are going to be towing a trailer, you need a spot to hook up your safety chains and here it's going to be a loop style welded to the bottom of the receiver tube. more
12/23/2019 1:17:04 PM
