bing tracking image

2014 Chevrolet Express Van Trailer Hitch Installation And Review Videos

     

Best 2014 Chevrolet Express Van Trailer Hitch Options- Video

Best 2014 Chevrolet Express Van Trailer Hitch Options

Today we're going to be taking a look at the best trailer hitch options for your 2014 Chevrolet Express van. On top, we've got our Class V Curt, followed by our Class V Draw-Tite and then below that we have our Class IV Curt and installed on our Express van, we have our etrailer.com Class IV hitch. As far as weight ranges are concerned, our Class V Curt is going to take the cake, having the highest tongue and towing capacity. As far as appearance goes, we're going to give that to the etrailer.com's hitch for its matte finish. It can also be tied here with our Curt because it has a matte finish as well. Now, if this is for recreational use, for your bike racks and other accessories like that, you won't need the extra high capacity of your Class V, so either our Class IV Curt, or our Class IV etrailer.com hitch would be the best option for those things.The big difference between our Class IV and our Class V hitches is the weight ratings that they're capable of. more


Watch Video

2/7/2019 1:59:40 PM



Trailer Hitch Installation - 2014 Chevrolet Express Van - Draw-Tite- Video

Trailer Hitch Installation - 2014 Chevrolet Express Van - Draw-Tite

Speaker 1: Today on our 2013 Chevrolet Express van, we're gonna be taking a look at and showing you how to install the Draw-Tite Class III Max EZ Loader Trailer Hitcher Receiver, part number 41521.This is what our hitch looks like when it's installed. You can see cross tube is visible, however the hitch is nice and tucked in back behind the bumper so you're not gonna worry about hitting your shins or your legs on it or getting anything out of the vehicle. It's gonna be a Class III, it's gonna be two inch by two inch, it's gonna have a reinforced card to give you a little extra stability on the receiver tube. This forward hole here is gonna be your hitch pinhole, it's gonna be five-eighth's inch in diameter. This back hole here, is for J-Pin Stabilization Device only. J-Pin Stabilization Device is gonna take all the shake and rattle out of any of your hitch mount accessories. more


Watch Video

11/21/2017 11:27:53 AM



Trailer Hitch Installation - 2014 Chevrolet Express Van - Curt- Video

Trailer Hitch Installation - 2014 Chevrolet Express Van - Curt

Speaker 1: Today on our 2014 Chevrolet Express van, we're going to be taking a look at, and showing you how to install the Curt Class V trailer hitch receiver, part number C15320. This is what our hitch looks like when it's installed. As you can see, the cross tube is completely visible. However, this is a very heavy duty hitch, and it is nice and tucked in back behind the bumper, so you're not going to have to worry about hitting your shins or your legs on it when you're getting anything out of the vehicle.It's going to be a Class V. It's going to be a two inch by two inch. It's going to have a reinforced collar to give you a little extra stability around the receiver tube. more


Watch Video

11/20/2017 1:03:47 PM



Trailer Hitch Installation - 2014 Chevrolet Express Van - Draw-Tite 41946- Video

Trailer Hitch Installation - 2014 Chevrolet Express Van - Draw-Tite 41946

Speaker 1: Today on our 2014 Chevrolet Express Van we're gonna be taking a look at, and showing you how to install, the Draw-Tite Class V Ultra Frame Trailer Hitch Receiver, part number: 41946.This is what our hitch looks like when it's installed. As you can see, the cross tube is visible; however, this is a very heavy duty hitch, and it's tucked nicely back behind the bumper. You're not gonna have to worry about hitting your shins or your legs on it when you're getting anything out of the vehicle. One thing about this being a Class V, it is still gonna be a 2" x 2", whereas some of our other Class V hitches are 2-1/2" x 2-1/2". That's gonna come in handy if you have any non-trailered accessories but are still looking for a hitch for heavier hauling. The back hole here is gonna be a 5/8" hitch pin hole, also gonna be reinforced. more


Watch Video

11/20/2017 1:03:32 PM



Draw-Tite Max-Frame Trailer Hitch Installation - 2014 Cherolet Express Van- Video

Draw-Tite Max-Frame Trailer Hitch Installation - 2014 Cherolet Express Van

Speaker 1: Today on our 2014 Chevy Express van, we're going to be taking look at, and showing you how to install the Draw-Tite Max Frame multi-fit Class III trailer hitch receiver, part number 37136. This is what our hitch looks like when it's installed. As you can see, it does hand down a little bit low. This van does sit high, so it's not going to be an issue.It's going to be a Class III. It's going to be two inch by two inch. Has a nice thick cross tube. more


Watch Video

11/20/2017 1:02:27 PM



Draw-Tite Trailer Hitch Installation - 2014 Chevrolet Express Van- Video

Draw-Tite Trailer Hitch Installation - 2014 Chevrolet Express Van

Speaker 1: Today on our 2014 Chevrolet Express van, we're going to be taking a look at and showing you how to install the Draw-Tite class five trailer hitch receiver, part number DT45507. Here, you can see the cross tube is completely visible. However, this is a very heavy duty hitch. This being a heavy duty hitch, it's going to allow you to haul a lot heavier loads. It's going to be a class five. It's going to be 2 and a half inch by 2 and a half inch. more


Watch Video

11/20/2017 1:02:11 PM



Trailer Hitch Installation - 2014 Chevrolet Express Van - Curt 13040- Video

Trailer Hitch Installation - 2014 Chevrolet Express Van - Curt 13040

Speaker 1: Today on our 2014 Chevrolet Express van, we're going to be taking a look at, and showing you how to install the Curt Class III trailer hitch receiver, part number 13040. As you can see the cross tube is visible. However, it is nice and tucked in, back behind the bumper, so you're not going to have to worry about hitting your legs or shins on it when you're unloading from the vehicle itself.It's going to be a Class III. It's going to be two inch by two inch. It's going to have a reinforced collar to give you a little extra stability on your receiver tube. You're going to have a 5/8 inch hitch pin hole. more


Watch Video

11/20/2017 8:42:38 AM



Trailer Hitch Installation - 2014 Chevrolet Express Van - Curt 14090- Video

Trailer Hitch Installation - 2014 Chevrolet Express Van - Curt 14090

Speaker 1: Today on our 2014 Chevrolet Express van, we're going to be taking a look at, and showing you how to install the Curt Class IV trailer hitch receiver, part number 14090. This is what our hitch looks like when it's installed. As you can see, the cross tube is visible. However, it doesn't hang down too low, so you're not going to have to worry about ground clearance. And it's nice and tucked in back behind the bumper, so you're not going to worry about hitting your shins or your legs on it when you're unloading anything from the vehicle.This is going to be a Class IV. It's going to be a two inch by two inch. more


Watch Video

11/20/2017 8:42:26 AM



  1