Best 2011 Cadillac SRX Hitch Options- Video
Today we're going to be taking a look at the best hitch options for your 2011 Cadillac SRX. We're going to start with our top hitch here. This is going to be the CURT class three, part number C13002. Then our second hitch is going to be the CURT class two hitch, part number C12070, followed by the last one here. Going to be our Draw-Tite class three, part number 75682. Now our first major difference in our hitch is going to be this CURT here. This is going to be a class two hitch, where the other ones are going to be class threes. more
6/29/2016 12:29:18 PM
Trailer Hitch Installation - 2011 Cadillac SRX - Curt- Video
Today on our 2011 Cadillac SRX, we'll be installing the Curt Hitch, part number C12070. This is what our hitch will look like once onstalled. Next we're going to give you a coule of measurements, to assist your selecting accessories for your hitch, such as a ball mount, bike rack, or cargo carrier. From the center of the hitch pin hole to the outermost edge of the bumper is 2 1/4 inches. From the top of the receiver tube to the ground is 18 inches. Now we'll go ahead with installation. Before we get in our install, we'll go ahead and point out the attachment points. We'll have a total of 6 attachment points, 2 on each inner frame rail, and 2 at the center across the rear bumper structure. more
11/27/2013 7:23:59 AM
Trailer Hitch Installation - 2011 Cadillac SRX - Curt C13002- Video
Today on our 2011 Cadillac SRX well be installing the Curt hitch, part number C13002. This is what our hitch will look like when its in place. Next well go ahead and give you a couple measurements to assist you with selecting accessories for your new hitch, such as a drawl bar, a bike rack or cargo carrier. From the center of the hitch pin hole to the outer most edge of the bumper is three and three quarter inches. From the top of the receiver tube opening to the ground will be 18 inches. Now lets go ahead with the installation. more
12/21/2012 1:04:03 PM
Trailer Hitch Installation - 2011 Cadillac SRX - Draw-Tite- Video
Today on our 2011 Cadillac SRX well be installing the Draw-Tite hitch, part number 75682. This is what our hitch will look like once its in place. Next well go ahead and give you a couple of measurements to assist you when selecting accessories for your new hitch such as a draw bar, a bike rack, or a cargo carrier. From the center of the hitch pin hole to the outer most edge of the bumper is 3 inches. From the top of the inside of the receiver tube to the ground is 17 inches. Now lets go ahead with the installation. more
12/21/2012 1:03:33 PM
