Trailer Wiring Harness Installation - 2016 Toyota Sienna- Video
Speaker 1: Today on our 2016 Toyota Sienna, we're going to take a look at and show you how to install the Tekonsha T1 Vehicle Wiring Harness with the Four Pole Flat Trailer Connector. Part number is 118498.Here is what our wiring harness is going to look like. This is going to provide a four pole flat trailer connector, which is going to be ideal for powering cargo carriers or utility trailers. Now, the trailer or cargo carrier you're going to connect to should also have a four pole flat connector. Now, the brown wire gives us running lights. The yellow is going to be for our left turn and brake signal. more
1/18/2018 1:23:46 PM
Tekonsha Trailer Wiring Harness Installation - 2016 Toyota Sienna- Video
Speaker 1: Today, on this 2016 Toyota Sienna, we'll be having a look at and showing you how to install the Tekonsha T1 Vehicle Wiring Harness with a 4-Pole Flat Trailer Connector, Part Number 118648. Here's what a wiring looks like installed. When it's not in use, we can store it out of the elements and out of the way in our jack storage compartment. To access it, we'll open our compartment, pull our wiring out, we'll place it to the side of the latch for our hatch, that way when we close the latch over it, it won't get caught in there and get pinched. And as you can see, we'll have an adequate length of wiring to reach down by the receiver on our hitch. We have this nice dust cover that covers it up when it's not in use. more
12/21/2017 7:52:34 AM
Trailer Wiring Harness Installation - 2016 Toyota Sienna C56261- Video
Today on our 2016 Toyota Sienna, we're going to be showing you how to install the CURT t-connector vehicle wiring harness with the four pull flat trailer connector. Part number is C56261. Our four pull plug, when we're ready for use, we'll just bring it over and let it sit right over the set rubber gasket there. That allows it to be held in place nicely. We're able to close our door there on top and then just pull out whatever that it is that we need. When not in use, what we can do is coil up that wire, just like that, bring that cap around and then we can use that to hold our wiring nice and tightly right here. Here's what our kit's going to look like when we pull it out of our package. more
7/19/2016 11:55:27 AM
