Curt Trailer Hitch Installation - 2010 Nissan Altima- Video
Today on our 2010 Nissan Ultima, we're gonna be installing Curts class 1, 1 1/4 inch trailer hitch receiver. Part number C11352.Then this is what our hitch is gonna look like when it's installed. The cross tube is gonna be visible, but it's gonna be tucked back pretty far, so you're really only gonna notice the receiver sticking out the back. It's a class 1, 1 1/4 by 1 1/4 inch receiver, so it's gonna be great for all of your light towing needs. From bike racks to cargo carriers, and very small trailers.It uses a half inch hitch pinning clip, now one doesn't come included with the hitch but you can pick one up here at etrailer.com.It features plate style safety chain loops, with a fairly large opening, so it should accommodate most safety chains. It features a 200 lb tongue weight, that's the force going down on top of the receiver, and a 2000 lb gross towing capacity. more
1/23/2019 10:47:14 AM
Best 2010 Nissan Altima Hitch Options- Video
Today on our 2010 Nissan Ultima, we'll be looking at our best hitch options. We have 2 hitches that we're looking at here today. They are both class I hitches. On the top, we have a Curt, part number C11352. On the bottom, we have a Draw-Tite, part number 24796. Now, I'd like to point out one of the obvious difference between our 2 hitches here today. The Curt is significantly wider than the Draw-Tite, and because of that, the Curt hitch will install into our vehicle's frame rail and existing holes,. You have to enlarge 1 of the holes in the frame rail to feed your carriage bolts and your spacer plates into it. Our Draw-Tite hitch, however, we have to drill all 4 holes into the trunk pan where your spare tire well is. more
9/29/2016 4:21:35 PM
