Best 2018 Dodge Charger Trailer Hitch Options- Video
Hey guys, Clayton here at etrailer.com. Today, we'll be looking at the best hitch options for your 2018 Dodge Charger.We have our hitches set up here. On the top, this is the Curt class three. In the middle, this is the Draw-Tite class three. And on the bottom, we have the Draw-Tite class two. Between these three options, in my professional opinion, I like the Draw-Tite hitch.The Draw-Tite class two hitch is going to have an inch and a quarter by inch and a quarter hitch receiver opening. more
7/15/2020 2:42:07 PM
Trailer Hitch Installation - 2018 Dodge Charger- Video
Speaker 1: Today on our 2018 Dodge Charger, we're going to be taking a look at and showing you how to install the Draw-Tite Class II Custom Fit Trailer Hitch Receiver, part number 36548.Here's what our hitch is going to look like once we have it fully installed. Now it is going to hang down below the bumper and the cross tube is going to be visible. It's going to offer us an 1-1/4 inch by 1-1/4 inch receiver tube opening which means this is going to be great for bike racks or other small accessories.Now the way we're going to attach any of our accessories to the hitch pin hole here on the side and it is going to accept a standard 1/2 inch pin and clip. Now while these aren't included in our kit, you can pick them up here at etrailer.com. And as far as the safety chain connection points go, it's going to be a loop style, welded to the bottom of the receiver tube and as you can see, we're not going to have too much trouble getting most size hooks on or off and we'll have plenty of room to get those on there and not have to worry about interference with the pin and clip.As far as weight capacity goes, our hitch is going to have a 300 pound tongue weight, which is the maximum downward force at the receiver tube. It's also going to have a 3500 pound gross trailer weight rating which is the amount it can pull including the trailer and everything we have loaded on it. more
11/29/2018 1:32:12 PM
Draw-Tite Max-Frame Trailer Hitch Installation - 2018 Dodge Charger- Video
Speaker 1: Today on our 2018 Dodge Charger, we're going to be taking a look at and showing you how to install the Draw-Tite Class 3 custom fit trailer hitch receiver. Part number 76145.So here's what our hitch is going to look like once we do have it installed. It is going to sit just right below the bumper, but it is going to blend in nicely with the black plastic here, so it's not going to distract from the looks of our charger. It is a class three hitch, which means it's going to give us that two inch by two inch receiver tip opening, and as you can see, it has a reinforced collar, not only giving it that added strength, but just an overall clean, finished look.Now the way that we're going to attach any of our accessories through our hitch, is going to be through this hole right here towards the front. Now it is going to accept a standard Five Ace pen and clip. Although not included in the kit, but you can pick one up on our website, using part number PC3. more
11/15/2017 12:17:14 PM
