Best 2015 Chevrolet Malibu Hitch Options- Video
Today we're going to be taking a look at the best hitch options for your 2015 Chevrolet Malibu. First we've got our CURT, which is part number C12115. Then we've got our Draw-Tite, which is part number 36538. Both of these hitches are going to be pretty similar in almost every aspect. There's just going to be a few differences, and they're primarily cosmetic. Both of them have the reinforcement collar around the 1-1/4" by 1-1/4" receiver tube. more
6/12/2016 8:37:08 AM
Best 2015 Chevrolet Malibu Hitch Options 36538- Video
Today, we'll be taking a look at the best three hitch options available for our 2015 Chevrolet Malibu. Now here's going to be our three hitch options available. They're all going to be Class 2's, and then they're all going to be an inch and a quarter by and inch and a quarter. The CURT, part number C12115. The Draw-Tite, part number 36538. And then, the Hidden Hitch, down here on the bottom, which is going to be part number 90242. Now the only significant difference between the three, and specifically, the Draw-Tite and the Hidden Hitch, is that the Hidden Hitch is going to come with your inch and a quarter by inch and a quarter draw bar and end cap to go on the end of it. The CURT, it's going to be very similar in the mounting features and bracketry as the Draw-Tite and the Hidden Hitch. The only difference is is that the plate is going to come all the way around, giving it a fully welded construction on the outer brackets of your hitch. Now note that all three hitches are going to have three plates that are going to mount when you assemble them. more
10/7/2015 3:01:06 PM
Trailer Hitch Installation - 2015 Chevrolet Malibu - Curt- Video
Today on our 2015 Chevrolet Malibu we're going to be installing the CURT trailer hitch receiver, part number C12115. Now we're going to first begin our installation here. We're over here on the driver side just above the muffler and the exhaust. We're going to need to remove this bolt right here. To remove that bolt we'll be using a 13mm socket. Next we're going to need to clean out the weld nut over here on this side. more
12/5/2014 3:01:18 PM
