Hopkins Plug-In Simple Vehicle Wiring Harness Installation - 2014 Mazda CX-5- Video
Hey everyone, Shane here with etrailer.com. Today have a 2014 Mazda CX-5. I'm gonna walk you how to install the Hopkins four pole wiring harness. This is gonna give you the proper lighting functions to safely tow a trailer, right turn signal, left turn signal running lights, and your brake lights. It's gonna live inside the vehicle so you can kind of see how it hangs out here. See, it gives us plenty of space to hook up to our trailer wiring. more
11/11/2022 10:27:38 AM
Best 2014 Mazda CX-5 Trailer Wiring Options- Video
Today we're going to be taking a look at the best custom-fit vehicle wiring harnesses available for the 2014 Mazda CX5. Now all of the wiring harnesses that we have here today are all going to offer the four-pole flat trailer connector. That's going to power the right turn and brake, left turn and brake, running lights, and also it grounds out the system on the trailer. We've got our CURT here. This is a non-powered converter box. This is designed for use only in the CX5 with the incandescent bulb or non-LED bulbs. Then we're going to have the Tekonsha here and the Hopkins here. more
6/6/2017 2:04:10 PM
Trailer Wiring Harness Installation - 2014 Mazda CX-5- Video
Okay, today on this 2014 Mazda CX5, we're going to install part number C56011 from Curt. This is a Curt T connector, vehicle-wiring harness with a 4 pole flat. Now we're going to install our wire harness. We need to get inside the vehicle so we will go ahead and open the back hatch and we'll go ahead and remove the floor coverings, as well as the threshold. It looks like there's two plastic fasteners. Okay, we'll go ahead and remove the rivet right here, this plastic rivet, so we will pull out the center and then the rest of it comes right out. It's just a steady pull straight up, will release it from those snaps. There it is. One is stuck so we'll just use a trim-panel tool to remove it. Out next step is to work with the side panel here, so we're going to undo this fastener and just pull it out a little bit so we'll get some extra working room to work our wires inside. It might be a good idea to go ahead and remove the phone core support inside as well. more
8/27/2014 2:52:55 PM
Trailer Wiring Harness Installation - 2014 Mazda CX-5 118563- Video
All right, today on our 2014 Mazda CX-5, we're going to install part number 118563. To start off our install, we're going to have to open up the back hatch and get access to the wiring behind the tail lights, so we're going to have to remove some interior body panels to do this. First off, we'll remove the floor coverings to get down to the spare tire. Next we'll go ahead and remove yourthreshold. Next we'll go ahead and remove the foam inserts around the spare tire. Now to remove the threshold, there will be two plastic fasteners, one on each end, we have to remove. Working from the bottom and prying from the sides, we'll go ahead and work it free, then we can go ahead and loosen up the side panels. There will be a small plastic fastener we have to remove, we'll do this on both sides. more
12/26/2013 10:06:07 AM
