Tekonsha T-One Vehicle Wiring Harness Installation - 2013 Kia Sorento- Video
Hi, I'm Shane with etrailer.com. Today you're going to be taking a look at, I'm going to walk you through the installation on the Tekonsha T-One Vehicle Wiring Harness. With 4-pole flat trailer connector for your Kia Sorento with factory tow package. It's going to plug directly into your factory plugs. It's going to have a convertor box. This is going to help protect your factory wiring from any back feed from the trailer. more
5/30/2019 1:57:50 PM
Trailer Wiring Harness Installation - 2013 Kia Sorento- Video
Today on our 2013 Kia Sorento well be installing the Curt T-Connector Vehicle wiring harness for factory toll package with a four-pull flat trailer connector, part number C56151. The two ports that well be plugging into the factory wiring harness are located here on the driver side rear. Well need to remove two dust covers, one from each of the plugs on the factory wiring harness before we can install our new Curt T-Connector Vehicle wiring harness.To remove each of the dust covers, simply pushing the locking tab and gently pull out. Now, were ready to plug our new Curt T-Connector in. Simply match up each of the plugs with the opposite side, and plug them in, making sure that we hear each of the locking tabs locked firmly into place. Now that we have each of the plugs connected, well go ahead and add our 10 amp fuse into the red fuse holder.Next, well need to go ahead and add our two-sided tape to the back of the converter box. more
12/4/2013 4:47:23 PM
