Tekonsha T-One Vehicle Wiring Harness Installation - 2017 Ford Fusion- Video
Hello, everybody. Clayton here etrailer.com. Here at etrailer, we install, test and review, a lot of different products to help you as a customer make a more educated decision before your purchase. Today, we're gonna be working on a 2017 Ford Fusion. We're gonna be taking a look at, and I'll be showing you how to install the Tekonsha T1 Vehicle Wiring Harness. This kit is gonna give you a four-pole on the back of your fusion. more
4/13/2021 2:15:30 PM
Curt T-Connector Vehicle Wiring Harness Installation - 2017 Ford Fusion- Video
Speaker 1: Today on our 2017 Ford Fusion, we're gonna be taking a look at and showing you how to install the Curt T-Connector Vehicle Wiring Harness with 4-pole Flat Trailer Connector, part number C56351. So, here's what our wiring's gonna look like once we have it installed. Now, this is gonna provide us with a four-pole flat trailer connector that's gonna give us all the required lights to get safely down the road, such as our tail lights, our turn signals, and our brake lights.Now, our wiring is designed to stay on the inside of the car until we're ready to use it, and then in that case, we'll just drop it down through the trunk and we can hook up our trailer. Now, when we're not towing it, we can store our wiring inside of our trunk, either right here on the floor, or if we lift it up, we can store it by our spare tire so it's not gonna be in the way.As far as installation goes, we are gonna have a couple connections behind our tail lights that our harness is gonna plug into. We're not gonna have to cut or splice any kind of factory wiring, and our kit is also gonna have a convertor box, which is gonna make sure that our vehicle is nice and protected if there we're any problems on the trailer end. Now, it's gonna get power from our battery, and that as well is fuse protected, so we're not gonna have to worry about the module having any problems either.So, now that we've seen what the end result is, let's show you how to get it install.To begin our installation, we're gonna need to pull out all the floor coverings from the trunk, and we'll go ahead and set them aside for right now. more
8/24/2018 3:02:11 PM
