Swagman XTC4 Hitch Bike Racks Review - 2013 Honda CR-V- Video
Today on our 2013 Honda CRV we're going to be doing a test fit of the Swagman XTC 4. This is going to be your platform-style 4-bike rack, and it's only going to come with a 2" shank for your 2" hitches. It's going to be part number S64665. Let's go ahead and fit it into our 2" receiver that we have here today. Once you insert it into your receiver, line up your pinholes. With your pinhole lined up, insert your anti-rattle bolt, which will look like this. Turn the key to unlock and lock, and pull it off. more
4/6/2015 5:13:50 PM
Saris Freedom SuperClamp Hitch Bike Racks Review - 2014 Honda CR-V- Video
Today on our 2014 Honda CRV we will be test fitting the Saris Freedom Superclamp platform-style 2-bike rack. That's part number SA4025. This can be used for either 1-1/4" or 2" hitches. We've got a 2" hitch here today so we can go ahead and begin by inserting our shank into our receiver. Now we'll line our pinholes up. That looks pretty good. more
2/6/2015 10:34:53 AM
Saris Freedom Hitch Bike Racks Review - 2014 Honda CR-V- Video
Today on our 2014 Honda CRV we will be test fitting the Saris Freedom tilting platform-style 4-bike rack. That's part number SA4414B. This is for 2" hitches so we've got a 2" hitch here today. We can go ahead and begin by inserting our shank into our receiver. We'll line up our pinholes. That actually looks pretty good. more
1/28/2015 5:45:53 PM
Saris Thelma Hitch Bike Racks Review - 2014 Honda CR-V- Video
Today on our 2014 Honda CRV, we'll be test fitting the Saris Thelma Platform Style 3 Bike Rack, that's part number SA4239B. This can be used for either 1 1/4 or 2 inch hitches. We've got a 2 inch hitch here today, we can go ahead and begin by inserting our shank through our receiver, we'll line up our pin holes, all right then we'll take our anti rattle bolt, it's included with this bike rack, start threading that through and we'll take our socket wrench and tighten that the rest of the way down. Nice thing about this anti rattle bolt it's going to help reduce the play and the wobble within our hitch and our bike rack as you can see there. We'll put our clip in place and then we can take a few measurements. Starting with our nearest point looks like it's going to be from here to our bumper and that's going to be about 4 inches away. Overall we've added about 13 1/2 inches to our vehicle and for our ground clearance looks like about 13 1/2 inches right here. more
1/27/2015 3:53:22 PM
Saris Freedom SuperClamp Hitch Bike Racks Review - 2015 Honda CR-V- Video
Today on our 2015 Honda CRV, we'll be test fitting the Saris Freedom Super Clamp Platform Style 2 Bike Rack, that's part number SA4025. This can be used for either 1 1/4 or 2 inch hitches. We've got an 1 1/4 hitch here today. We can go ahead and begin by inserting our shank into our receiver, we'll line up our pin holes. That looks pretty good and then we'll take our included anti rattle bolt and lock and start threading that through and once we get that hand tightened, we'll take our socket wrench and finish tightening that the rest of the way down. Nice thing about this anti rattle bolt it's going to help reduce the wobble and the play within our hitch and our bike rack as you can see there. more
1/26/2015 11:31:17 AM
SportRack Hitch Bike Racks Review - 2015 Honda CR-V SR2403- Video
Today on our 2015 Honda CRV we will be test fitting the Sport Rack tilting 3-bike rack. That's part number SR2403. This can be used for either 1-1/4" or 2" hitches. We've got an 1-1/4" receiver here today so we can go ahead and begin inserting our shank into our receiver. We'll line our pinholes up. Once we get those lined up we'll take our included anti-rattle bolt and start threading that through. more
1/26/2015 11:09:32 AM
Saris Thelma Hitch Bike Racks Review - 2015 Honda CR-V- Video
Today on our 2015 Honda CRV we'll be test fitting the Saris Thelma Platform-style Three Bike Rack. That's part number SA4239B. This can be used for either 1 1/4 or 2-inch hitches. We've got an 1 1/4 inch one here today. We can go ahead and begin by inserting our shank into our receiver. We'll line up our pin holes. more
1/26/2015 11:08:12 AM
Saris Bike Porter Hitch Bike Racks Review - 2005 Honda Odyssey- Video
Today on our 2005 Honda Odyssey, we'll be test fitting the Saris Bike Porter Tilting 4 Bike Rack, that's part number SA404B. This can be used for 1 1/4 or 2 inch hitches. We can go ahead and start by inserting our shank into our receiver. We'll go ahead and line our pin holes up. Once we get that lined up, we'll take our anti rattle bolt and clip, go ahead and start threading that through. All right once we get that threaded through, we'll go ahead and take our socket wrench and tighten that down the rest of the way. more
1/2/2015 3:00:48 PM
Yakima FullTilt Hitch Bike Racks Review - 2005 Honda Odyssey- Video
Today on our 2005 Honda Odyssey we will be test fitting the Yakima FullTilt 4-bike rack. That's part number Y02462. Now this is for 1-1/4" or 2" hitches. We can go ahead and start by inserting our shank into our receiver. We're going to want this to go in our pinhole so we'll wait until that snaps in. That's when we know we got it. more
1/2/2015 2:23:40 PM
Swagman Titan Hitch Bike Racks Review - 2005 Honda Odyssey- Video
Today on our 2005 Honda Odyssey we will be test fitting the Swagman Titan tilting 4-bike rack. That's part number S63410. Now it's for 1-1/4" hitches and 2" hitches as well. We can go ahead and start by inserting our shank into our receiver. We'll line our pinholes up. Then we'll take our anti-rattle bolt and clip, go ahead and start threading that through. more
1/2/2015 1:47:15 PM
Yakima HoldUp Hitch Bike Racks Review - 2012 Honda Odyssey- Video
Today on our 2012 Honda Odyssey, we're doing a test fit of the Yakima holdup platform-style two bike rack. That part number is Y02443. We already have our bike secured down. First going to show you one of the key features of this rack. When I come to the back here, lift slightly up and then pull on the leg pin, that's going to allow us to tilt our bike rack away from our vehicle. I've already checked; because this is pretty close to our door, we aren't able to open our door all the way. more
10/16/2014 3:03:09 PM
Saris Axis Hitch Bike Racks Review - 2013 Honda Fit SA843B- Video
Today on our 2013 Honda Fit we're going to be doing a test fit of the Saris Axis 3-bike rack for 1-1/4" and 2" hitches, part number SA843B. Now we've already go ahead and set up our bike rack for an 1-1/4" hitch. Go ahead and take the shank of the bike rack and slide it into the receiver, lining up the hole with the threads here. We'll then go ahead and take our anti-rattle bolt which is also a lock, thread that in. We'll then take our socket wrench, go ahead and tighten it down. Now we've taken the movement from the bicycle rack shank and the hitch out; it doesn't move. more
10/15/2014 5:00:32 PM
Softride Hang2 Tilting Bike Rack Review - 2010 Honda CR-V- Video
Today on our 2010 Honda CRV, we'll be test fitting the Soft Ride Hang Two Hitch Mounted Bike Rack, part number SR27041. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. After lining up the pin holes, we'll thread in the anti-rattle bolt from the right hand side of the bike rack. I'll be using the threaded hole which is closest to the mast of the bike rack. After tightening the anti-rattle bolt down with a wrench, we'll go over a few clearance measurements. We have about 13 inches of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about 2 inches away and we've added about 19 inches to the overall length of our CRV. We'll undo the two rubber straps which secure the top part of the bike rack to the bottom part of the bike rack. more
10/15/2014 11:35:47 AM
Saris Axis 3 Bike Rack Review - 2010 Honda CR-V- Video
Today on our 2010 Honda CRV we'll be test fitting the Saris Axis Aluminum Hitch Mounted Hanging 3 Bike Rack, part number SA843B. We'll being our test fit by sliding the shank of the bike rack into the opening of the hitch. After lining up the pinholes we'll take our anti-rattle bolt and thread it through the left-hand side of the shank. After tightening it down with a wrench we'll secure it with a lock on the other side. Now we'll go over a few clearance measurements. We have about thirteen inches of ground clearance. more
10/15/2014 11:34:31 AM
Thule Hitching Post Pro Hitch Bike Racks Review - 2005 Honda CR-V- Video
Today on our 2005 Honda CRV we're going to be doing a test fit on the Thule Hitching Post Pro. This is tilting and folding 4-bike rack. It's been designed for use with an 1-1/4" or 2" hitches. Part number on it is TH934XTR. To begin our test fit we just slide the shank of the rack right into the receiver tube of our hitch. We need to line up our threaded pinhole with our hitch pinhole. Once we have those in line we'll take the provided bolt and we're going to start threading this in. more
10/15/2014 9:39:13 AM
Saris Bike Porter Hitch Bike Racks Review - 2005 Honda CR-V- Video
Today on our 2005 Honda CRV we're going to be doing a test fit on the Saris Bike Porter. This is a folding and tilting 4-bike rack. It's been designed for use with 1-1/4" or 2" hitches. The part number is SA404B. This is also available in a 2-bike configuration. That part number is SA402B. To begin our test fit we just slide the shank of the rack into the receiver tube of our hitch. more
10/15/2014 9:29:42 AM
Thule Helium Aero Hitch Bike Racks Review - 2013 Honda Fit- Video
Today on our 2013 Honda Fit, we're going to be doing a test fit of the Thule Helium Aero 2-bike rack for 1 1/4 and 2-inch hitches. Part number TH9042. Now, we've already gone ahead and set up our bike rack for 1 1/4 hitch. To install the bike rack in the hitch, you'll pull out here on the black arm, slide it into the hitch, lining it up at the whole in the receiver so that the arm goes back in. We'll then go ahead and tighten the black knob down here. This will take any movement out. more
10/14/2014 9:21:11 AM
Saris Thelma Hitch Bike Racks Review - 2010 Honda CR-V- Video
Today on our 2010 Honda CRV we'll be test fitting the Saris Thelma platform-style hitch-mounted 3-bike rack, part number SA4239B. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. After lining up our pinholes we'll need to thread in the anti-rattle bolt from the left hand side of the shank. After tightening the bolt with a wrench, the bike rack is secured and we're ready to go over some clearance measurements. We have about 16" of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about 4" away. We've added about 13" to the overall length of our CRV. more
10/10/2014 8:29:45 AM
Saris Freedom SuperClamp Hitch Bike Racks Review - 2013 Honda Accord- Video
Today on our 2013 Honda Accord we're going to be doing a test fit on the Saris Freedom Superclamp. This is a platform-style 2-bike rack. It's been designed for use with 1-1/4" or 2" hitches. Part number on it is SA4025. Now to begin our test fit we just slide the shank of the Superclamp into the receiver tube of our hitch. As we do this we'll line up our threaded hole with our hitch pinhole. Once those are in line with each other we're going to take our provided bolt and we'll thread that in. more
10/2/2014 11:10:24 AM
Hollywood Racks Traveler Hitch Bike Racks Review - 2013 Honda Accord- Video
Today on our 2013 Honda Accord we're going to do a test fit on the Hollywood Racks Traveler 4-Bike Rack. This is a tilting and folding style rack. It's been designed for use with inch and a quarter or two inch hitches. Part number on it is HR8500. We're going to be installing this in a Class 1 hitch today. Please keep in mind that when doing that you're going to limit your capacity to just two bikes. To begin our test fit, we'll slide the shank of the rack into the receiver tube of our hitch. more
10/2/2014 11:09:29 AM
Thule Hitching Post Pro Hitch Bike Racks Review - 2013 Honda Accord- Video
Today in our 2013 Honda Accord, were going to be a doing a test fit on the Thule Hitching Post Pro. This is a folding and tilting 4-bike rack. Its been designed for inch and a quarter or two-inch hitches. Part number on it is TH934XTR. Now were using it in a class one hitch today so you will want to keep in mind that its going to limit our capacity to two bikes. Now to begin the test fit, were going to slide the shank of the rack into the receiver tube of our hitch. more
9/30/2014 7:29:11 PM
SportRack Hitch Bike Racks Review - 2013 Honda Accord- Video
Today on our 2013 Honda Accord we're going to be doing a test fit on the Sport Rack folding and tilting 3-bike rack. Now they've designed this so we can use it with 1-1/4" or 2" hitches. Part number on it is SR2403. This is also available in a 4-bike configuration if you prefer it that way. Part number on that is SR2404. Now on our Accord today we've just got a class one hitch installed. more
9/30/2014 7:21:23 PM
Saris Thelma Hitch Bike Racks Review - 2013 Honda Accord- Video
Today on our 2013 Honda Accord we're going to be doing a test fit on the Saris Thelma. This is a folding platform-style 3-bike rack. It's been designed for use with 1-1/4" or 2" hitches. The part number on it is SA4239B. Now please keep in mind, we're using a class one hitch today, and when you use a class one hitch you are going to be limited to a 2-bike capacity. To begin our test fit we'll slide the shank of the rack into the receiver tube of our hitch. As we do this we'll line up our threaded hole with our hitch pinhole. more
9/30/2014 7:19:22 PM
Swagman Titan Hitch Bike Racks Review - 2013 Honda Accord- Video
Today on our 2013 Honda Accord we're going to be doing a test fit on the Swagman Titan. This is a folding and tilting 4-bike rack. They've designed it so we can use it with 1-1/4" or 2" hitches. The part number on it is S63410. Today on our Accord we've got a class one hitch, and when using a class one hitch with the Titan or any other 4-bike rack for that matter, you will be limited to a 2-bike capacity, so please keep that in mind. To begin our test fit we're just going to slide the shank of the Titan right into the receiver tube of our hitch. We then want to line up our threaded hole with our hitch pinhole. more
9/30/2014 6:29:19 PM
Yakima FullTilt Hitch Bike Racks Review - 2013 Honda Accord- Video
Today on our 2013 Honda Accord, were going to be doing a test fit on the Yakima FullTilt. This is a folding and tilting 4-bike style rack. Its been designed for use with inch and a quarter or two-inch hitches. The part number on it is Y02462. Now on our Accord, we have a class one hitch currently installed. That means that we need to limit the capacity that we put on the actual rack down to two bikes. more
9/30/2014 3:31:42 PM
Saris Bike Porter Hitch Bike Racks Review - 2013 Honda Accord- Video
Today on our 2013 Honda Accord we're going to be doing a test fit on the Saris Bike Porter. This is a folding and tilting 4-bike rack. It's been designed for use with 1-1/4" or 2" hitches. The part number on it is SA404B. We're using a class one hitch today, so I want you to keep in mind that you will be limited to a 2-bike capacity when using this rack. If this is the only hitch you plan on using your Bike Porter in, the SA402B is a 2-bike configuration that may work out perfectly for you. To begin the test fit we're just going to slide the shank of the Bike Porter into the receiver tube of our hitch. more
9/30/2014 2:16:03 PM
Softride Element Parallelogram Hitch Bike Racks Review - 2010 Honda CR-V- Video
Today on our 2010 Honda CRV we'll be test fitting the Softride Element Parallelogram tilting 4-bike rack, part number SR26248. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. Now there are two threaded pinholes in the inside shank of the bike rack. I'll be installing the anti-rattle bolt in the threaded pinhole closest to the mast of the rack. Once it's threaded in I'll tighten it down with a wrench and we can go over some clearance measurements. We have about 13" of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about 2" away. more
9/29/2014 4:51:26 PM
Yakima FullTilt Hitch Bike Racks Review - 2011 Honda CR-V- Video
Today on our 2011 Honda CRV we're going to do a test fit on the Yakima FullTilt. This is a folding and tilting 4-bike rack they've designed it for use with 1-1/4" or 2" hitches. The part number on it is Y02462. Now we also have this available in a 5-bike version if you'd prefer. That part number is Y02463. Now to begin our test fit we're just going to slide the shank of the rack into the receiver tube of our hitch. As you can see, you will want to help guide the silver portion in; that's the anti-rattle device. more
9/25/2014 9:31:10 AM
Swagman Titan Hitch Bike Racks Review - 2011 Honda CR-V- Video
Today on our 2011 Honda CRV we're going to be doing a test fit on the Swagman Titan. Now this is a folding, tilting 4-bike rack. It's been designed for use with 1-1/4" or 2" hitches. The part number on it is S63410. To begin our test fit we slide the shank of our rack into the receiver tube of our hitch. We'll then line up our threaded pinhole with our hitch pinhole. With those in line we can take our standard anti-rattle bolt, which is provided, and we're going to thread this through. more
9/24/2014 8:34:19 PM
Softride Dura Parallelogram Hitch Bike Racks Review - 2011 Honda CR-V- Video
Today on our 2011 Honda CRV we're going to be doing a test fit on the Softride Dura Parallelogram. This is a tilting-style 4-bike rack. It's begin designed for use with 2" hitches as well as 1-1/4". The part number on it is SR26247. The Dura Parallelogram has two threaded holes located on the passenger side. For today's test fit I'm going to be using that first hole. I'll want to begin by placing the rack into the receiver tube of our hitch. more
9/24/2014 8:32:37 PM
Saris Thelma Hitch Bike Racks Review - 2011 Honda CR-V- Video
Today on our 2011 Honda CRV we're going to be doing a test fit of the Saris Thelma. This is a platform-style folding 3-bike rack. They've designed it so you can use it with 1-1/4" or 2" hitches. The part number on it is SA4239B. Now to begin our test fit we're just going to slide the shank of the rack right into the receiver tube of our hitch. We need to line up our threaded hole with our hitch pinhole. Those in line, we'll have a anti-rattle bolt; we'll need to thread this through until we have it hand tight. more
9/24/2014 8:30:46 PM
Saris Freedom SuperClamp Hitch Bike Racks Review - 2011 Honda CR-V- Video
Today on our 2011 Honda CRV we're going to be doing a test fit on the Saris Freedom Superclamp. This is a platform-style 2-bike. Been designed to hold the bike onto the rack with no frame contact at all. It's been designed also for use with 1-1/4" or 2" hitches. The part number on it is SA4025. To begin the test fit we're just going to slide the shank of the rack into the receiver tube of our hitch. We're then going to line up our threaded hole with our hitch pinhole. more
9/24/2014 8:26:27 PM
Saris Freedom Hitch Bike Racks Review - 2011 Honda CR-V- Video
Today on our 2011 Honda CRV, we're going to be doing a test on the Saris Freedom. This is a platform style four bike, folding and tilting rack. It's been designed for use with 2" hitches. It's part number is SA4414B. Now to begin the test fit, we're just going to slide the shank of the Freedom right into the receiver tube of our hitch. As we do this we'll line up our threaded hole with our hitch pin hole. As we have those lined up we'll take our provided anti-rattle bolt. more
9/24/2014 8:20:34 PM
Saris Bike Porter Hitch Bike Racks Review - 2011 Honda CR-V- Video
Today on our 2011 Honda CR-V we're going to do a test fit on the Saris Bike Porter. This is a folding and tilting 4-bike rack. They designed it so we can use it with inch and a quarter or 2-inch hitches. The part number on it is SA404B. This also comes in a 2-bike version if you'd prefer that. The part number on that is SA402B. To begin our test fit, we'll just slide the shank of the rack into the receiver tube of our hitch. more
9/24/2014 8:17:39 PM
Kuat NV Hitch Bike Racks Review - 2011 Honda CR-V- Video
Today on our 2011 Honda CRV, we're going to be doing a test fit on the Kuat NV. This is a platform style, folding and tilting, four bike rack. They've designed for use in 2 inch hitches. The part number on it is N105-107. This is also available in a gunmetal gray and orange. It's part number N101-103. To begin our test fit, we just slide the shank of the rack into the receiver tube of our hitch. more
9/24/2014 6:52:52 PM
Softride Element Parallelogram Hitch Bike Racks Review - 2013 Honda Odyssey- Video
Today on our 2013 Honda Odyssey we're going to do a test fit on the Softride Element Parallelogram. This is a folding, tilt-away-style 4-bike rack. It's been designed for use with 1-1/4" or 2" hitches. The part number on it is SR26248. Now to begin our test fit we need to slide the shank of the rack into the receiver tube of our hitch. On the passenger side we have two threaded holes to choose from. You can see one here and one here. more
9/23/2014 10:49:39 AM
Saris Freedom SuperClamp Hitch Bike Racks Review - 2013 Honda Odyssey- Video
Today on our 2013 Honda Odyssey we're going to do a test fit on the Saris Freedom Superclamp. This is a platform-style 2-bike rack designed to hold the bikes without making contact with the frame. Part number on it is SA4025. They've designed this so we can use it with either 1-1/4" or 2" hitches, so it's got a wide variety of applications that it will work for. To begin our test fit we want to slide the shank of our rack into the receiver tube of our hitch. We'll then line up our threaded hole with our hitch pinhole. With those in line we'll take our anti-rattle bolt which is provided, we'll slide that through and begin to thread it in. more
9/23/2014 10:47:44 AM
Saris Freedom Hitch Bike Racks Review - 2013 Honda Odyssey- Video
Today on our 2013 Honda Odyssey we're going to do a test fit on the Saris Freedom. This is a 4-bike platform-style folding and tilting rack. It's been designed for use in 2" hitches. The part number on it is SA4414B. Now to begin our test fit we need to slide the shank of the rack into the receiver tube of our hitch. As we do we need to line up the threaded hole with our hitch pinhole. more
9/23/2014 10:45:30 AM
Saris Bike Porter Hitch Bike Racks Review - 2013 Honda Odyssey- Video
Today on our 2013 Honda Odyssey we're going to do a test fit on the Saris Bike Porter. This is a folding and tilting 4-bike rack. It's been designed so you can use it with 1-1/4" or 2" hitches. Part number on it is SA404B. Now we also have this available in a 2-bike if you'd prefer that. That part number is SA402B. To begin we're just going to slide the shank of the rack into the receiver tube of the hitch. more
9/23/2014 10:42:03 AM
Kuat NV Hitch Bike Racks Review - 2013 Honda Odyssey- Video
Today on our 2013 Honda Odyssey we're going to do a test fit on the Kuat NV. This is a platform-style 4-bike folding and tilting rack. It's been designed for use in 2" hitches. Part number in the black and chrome is N105-107. It's also available in a gun metal gray and orange as part number N101-103. To begin our test we need to slide the shank of the NV into the receiver tube of our hitch. We'll slide it in far enough to line up our pinhole with our hitch pinhole. more
9/23/2014 10:23:29 AM
Thule Hitching Post Pro Hitch Bike Racks Review - 2014 Honda Odyssey- Video
Today on our 2014 Honda Odyssey, we're going to be test fitting the Thule Hitching Post Pro. This is a folding and tilting 4 bike rack designed for use in 1 1/4 and 2 inch hitches. It's part number is TH934XTR. To begin our test fit, we're going to slide the shank of the bike rack right into the receiver tube of our hitch. As we do this, we'll want to line up the threaded hole in the shank of the rack with the pin hole in the receiver tube of the hitch. With those lined up, we're going to take our anti-rattle bolt, and thread that in. We can then use our wrench to tighten that down. more
9/22/2014 12:01:57 PM
Yakima FullTilt Hitch Bike Racks Review - 2013 Honda Odyssey- Video
Today on our 2013 Honda Odyssey we're going to do a test-fit of the Yakima Fulltilt. This is a folding and tilting 4 bike rack. They've designed it for use with 1 1/4 or 2 inch hitches. Part number is Y02462. This is also available in a 5 bike configuration if you prefer that. Part number on that is Y02463. To begin our test-fit, we slide the shank of the rack into the receiver tube of our hitch. more
9/20/2014 9:16:55 AM
Yakima FullTilt Hitch Bike Racks Review - 2011 Honda Odyssey- Video
Rate your transcript OrderClientKevin BrossRef #20488Order #TC0706962615 Today on our 2011 Honda Odyssey we're going to be doing a test fit on the Yakima Full Tilt. This is a folding and tilting four bike rack. It's been designed for use with inch and a quarter or two inch hitches. Its part number is Y02462. To begin our test fit, we'll slide the shank of the rack right into the receiver tube of our hitch. I like to hold my thumb on that silver triangle shape part, just to aid it in. Slide it in until our small silver pin lines up with our larger pin hole. more
8/13/2014 4:28:14 PM
Thule Helium Aero Hitch Bike Racks Review - 2014 Honda Odyssey- Video
Today on our 2014 Honda Odyssey we're going to be test fitting the Thule Helium Aero. This is a folding and tilting two bike rack. It's been designed so you use it with the inch and a quarter like we're doing today or the two inch hitch; Part number on it is TH9042. This is also available in a three bike configuration; Part number is TH9043. To begin our test fit we're going to hold out on the black pin located on the right side of the shank and slide that shank right into the receiver tube of our hitch. I'll need to loosen my anti-rattle device up a little bit more here to allow it to slide in freely. You slide it in so that we line up our pin holes and then we'll allow the attached pin to go into that pin hole. more
8/13/2014 4:16:39 PM
Saris Bike Porter Hitch Bike Racks Review - 2014 Honda Odyssey- Video
Today on our 2014 Honda Odyssey, we're going to be test fitting the Saris Bike Porter. This is a folding and tilting 4-bike rack. They've designed it so we can use it in the 1 1/4 inch hitch as we're doing today or also in the 2 inch hitches. The part number on this SA404B. Now if you don't need a full 4-bike capacity, we also sell this in a 2-bike configuration as part number SA402B. To begin our test fit, we need to slide the shank of the rack into the receiver tube of our hitch. As we slide it in, we want to line up our threaded hole with our hitch pinhole. more
8/13/2014 4:00:14 PM
Saris Axis Hitch Bike Racks Review - 2014 Honda Odyssey- Video
Today on our 2014 Honda Odyssey we're going to do a test fit on the Saris Axis. This is a folding and tilting 3-bike rack. They've designed it for use with the 1-1/4" hitch we're going to use today or the 2" hitch. Part number on it is SA843B. Now to begin our test fit we're going to slide the shank of the rack right into the receiver tube of our hitch. We'll slide it in far enough so that our threaded hole lines up with our hitch pinhole. Now a great thing about this rack is it is nice and lightweight. more
8/13/2014 3:58:08 PM
Saris Axis Hitch Bike Racks Review - 2011 Honda Odyssey- Video
Rate your transcript OrderClientKevin BrossRef #20471Order #TC0790887954 Today on our 2011 Honda Odyssey, were going to do a test fit on the Saris Axis. This is a folding and tilting 3-bike rack. They have designed it for use with 1-1/4 or 2-inch hitches. Part number on it is SA843B. To begin our test fit, were going to slide the shank of the rack right into the receiver tube of our hitch. We need to slide it in far enough so that our pinhole lines up with the hitch pinhole. more
8/13/2014 3:50:45 PM
Saris Freedom SuperClamp Hitch Bike Racks Review - 2011 Honda Odyssey- Video
Rate your transcript OrderClientKevin BrossRef #20443Order #TC0866772015 Today on our 2011 Honda Odyssey we're going to be doing a test fit of the Saris Freedom SuperClamp. This is a platform-style 2-bike rack. They've designed it for use with 1-1/4" or 2" hitches. Part number on it is SA4025. To begin our test fit we'll slide the shank of the rack right into the receiver tube of our hitch. As we slide it in we want our pinhole to line up with our hitch pinhole. With those in line we'll take our anti-rattle bolt, we'll thread it in from the driver side over to the passenger side. more
8/13/2014 12:44:54 PM
Saris Bike Porter Hitch Bike Racks Review - 2011 Honda Odyssey- Video
Rate your transcript OrderClientKevin BrossRef #20441Order #TC0967230173 Today on our 2011 Honda Odyssey, we're going to do a test fit of the Saris Bike Porter. This is a folding and tilting four bike rack. It's been designed for use with inch and a quarter or two inch hitches, part number on it is SA404B. We also have this in the two bike configuration, as part number SA402B. To begin our test fit, we'll slide the shank of our rack right into the receiver tube of our hitch. We slide it in far enough so that our threaded hole lines up with our hitch pin hole. We'll then thread in our anti-rattle bolt. more
8/13/2014 12:38:29 PM
Thule Vertex Hitch Bike Racks Review - 2014 Honda Odyssey- Video
Today on our 2014 Honda Odyssey, We are going to be test fitting the Thule Vertex. This is a folding and tilting 4 bike rack designed for use in inch-and-a-quarter and 2-inch hitches. It's part number is Th9029. To begin our test fit, we are going to slide the shank of the rack right into the receiver tube of our hitch. As we slide it in, we'll want to keep an eye on the threaded hole and the shank of the rack to see when that lines up with our pinhole. With those lined up, we'll take our anti-rattle bolt. We'll thread that in, and we'll tighten it down with our wrench. Now in this position, our rack's going to offer us about 9 inches worth of ground clearance. more
7/24/2014 1:03:16 PM
Filter Videos
Filter Videos
