Trailer Wiring Harness Installation - 2008 Hyundai Santa Fe- Video
Today on this 2008 Hyundai Santa Fe we are going to install part number C56152 from Curt. OK, this wire harness plugs into the factory tow package, that's located on the vehicle, on the driver side, next to the exhaust. OK, to start off, we are going to remove the caps on both ends, there's a small tab that we push down and we can pull off the tab. We'll do this on both connectors. Now the older the vehicle is the more dirty this will be, and probably the harder to remove.OK, now we'll take the wire harness with the matching ends, plug them in into the factory wiring harness. We'll plug them together until you hear a click, where they snap together.We are going to go ahead and loosen up our exhaust, lower it down. And then we are going to loosen up the heat shield. more
11/18/2013 2:49:20 AM
Trailer Wiring Harness Installation - 2008 Hyundai Santa Fe 118415- Video
Today on this 2008 Hyundai Santa Fe, we're going to install part number 118415 from Tow Ready. Now, to get access to the wiring connectors, we have to remove some flooring panels and loosen the side panels so we can get access to the wiring behind the tail light. This lid and the tray below it get removed first, the two fasteners here, here, and one on the jack. Pop, this catches loose. Alright, next, we'll go ahead and remove the threshold. Alright, we'll unscrew this fastener here and there's one up here, will do too. more
3/2/2012 8:04:48 AM
