Wiper Technologies Windshield Wiper Blade Installation - 2017 Toyota RAV4- Video
Hey, everybody. Welcome to etrailer.com. I'm Bobby. And today on our 2017 Toyota RAV4, we're taking a look at our wiper technologies, beam style wiper blades. So guys, this is going to be a half decent way of going ahead and just replacing your potentially old or damaged wiper blades on your vehicle so you might start seeing a little tearing, a little not so good coverage on your windshield, if that starts happening, it might just be time to go ahead and get them replaced. Wiper technologies here, you're getting a decent little beam style wiper blade here. more
10/12/2021 10:31:11 AM
ClearPlus Integrated Rear Wiper Blade Installation - 2017 Toyota RAV4- Video
Hey, everybody. Welcome to etrailer.com. I'm Bobby and today we're taking a look at the Clear Plus integrated rear wiper blade. Here today on our 2017 Toyota RAV4. Now guys, there's gonna be a nice little weight going ahead and exchanging out your old blades. You guys want to go ahead and see, you can see this little guy right here is definitely worn out and you can see the little rubber strip is falling off. more
9/14/2021 11:11:37 AM
Rain-X Fusion Wiper Blades Installation - 2011 Toyota RAV4- Video
All right, today on this 2011 Toyota RAV4 were going to do a test fit of part #: RX880008 from Rain-X. this is their Fusion windshield wiper blade. All right, to start our test fit off we can go ahead and remove the original wiper blade thats on the vehicle. Well lift it up, theres a small tab that we have to push in so we can release it from the arm. Well slide it away from the arm and once we have it apart we can see that its a J-style arm. Then our new windshield wiper blade will slide right into place. more
1/17/2013 11:16:28 AM
Rain-X Weatherbeater Wiper Blades Installation - 2011 Toyota RAV4- Video
All right, today on this 2011 Toyota RAV4 were going to install part #: RX30224 from Rain-X, this is our Weatherbeater windshield wiper blade. All right, to start off the test fit were going to go ahead and remove the factory blade. Theres a small tab that we have to push, then we can go ahead and release it from the arm. Okay, well push on the tab and pull back and itll free up from the arm. With it apart we can see the arm has a J-style connector, so our new windshield wiper blade will go right in the place. Well basically line up the windshield wiper blade with the arm, slide it inside, then make sure that the latch is in alignment with the arm, well go ahead and push it together until it clicks. more
1/17/2013 11:16:23 AM
Filter Videos
Filter Videos
