Rain-X Weatherbeater Wiper Blades Installation - 2012 Nissan Titan- Video
Today on this 2012 Nissan Titan we're going to do a test fit of part number RX30224 from Rain-X. This is a Weather Beater windshield wiper blade. The things to know about this part. That is designed to be an OEM replacement blade. The rubber squeegee has UV inhibitors to protect you from the sun light. It is a frame style design that gives it multiple pressure points against the windshield. Now to start off our test fit we're go ahead and remove the original windshield wiper blades. First of all tab we have to push and we can go ahead and release them. more
12/16/2014 11:36:40 AM
Rain-X Weatherbeater Wiper Blades Installation - 2008 Nissan Titan- Video
Today on this 2008 Nissan Titan, we're going to install part number RX30224. This is the Rain-x Weather Beater windshield wiper blade. This is 24 inch length; this is for the driver's side. Inaudible 00:00:13 install, we'll go ahead and remove the existing wiper blade. You push the tab, and then pull back on the wiper blade to release it from the arm. With that out of the way, we can install the new windshield wiper blade. more
10/14/2013 3:57:44 PM
Rain-X Weatherbeater Wiper Blades Installation - 2010 Nissan Titan- Video
Today on our 2010 Nissan Titan, well be test fitting the Rain-X Weatherbeater Wiper Blades, driver side part number rx30224 and passenger side part number rx30222. Now, before we begin our test fit well first need to remove the factory or previously installed wiper blades. With this vehicle being equipped with a J-Hook style wiper arm well remove the wiper blades by lifting off the black cap and simply pulling the wiper blade down off of the J of the wiper arm. Well then repeat these steps for the other side.Now, to install the new Rain-X Weatherbeater Wiper Blades, well simply insert the center of the wiper blade into the J of the wiper arm until you hear a click. When you hear a click you know that the wiper blade has been correctly installed. Well then repeat these steps for the other side. more
5/21/2013 7:33:05 AM
Rain-X Fusion Wiper Blades Installation - 2012 Nissan Titan- Video
All right, today on this 2012 Nissan Titan were going to do a test fit of part #: RX880008, this is our Fusion windshield wiper blade. Now, to start off the test fit well go ahead and remove the original blade. There is a small tab we have to push to remove the original blade and well slide the blade back a little bit and release it from the arm. After youve taken it apart you can see it has a J-style arm. Well take the new blade and put it in place. Well make sure the lid is popped open and then we can install it into the J-arm. more
12/17/2012 1:32:50 PM
Filter Videos
Filter Videos
