Trailer Wiring Harness Adapter Installation - 2013 Toyota Tundra- Video
Today on our 2013 Toyota Tundra, we're going to review and install the Hopkins Adapter for 4-pole to 7- and 4-pole Trailer Connector, part number 37185. Here's what our trailer adapter is going to look like once installed. We took the vehicle from a standard 4-flat trailer connector and now have a 4-flat trailer connector along with the 7-blade style trailer connection point. Not all of our blades are hooked up, specifically the 12-volt battery source or the brake controller. However, the remaining 5 leads are hooked and are ready for use. Now, having both the 4-flat and the 7-blade connector, we can expand on our hook up options, and we can hook up to just about any trailering connection out there. Our customers like how well-built it is and easy to install. Now, let's go ahead and show you how to install it. To begin our install, we're going to remove the manufacturer's 4-flat trailer connector and bracket. more
7/10/2015 1:37:26 PM
Trailer Wiring Harness Adapter Installation - 2007 Toyota Tundra- Video
Today on this 2007 Toyota Tundra Double Cab, we're going to install part number 37185. This is the Adapter 4 Pole to 7 Pole and 4 Pole from Hopkins. For this part, we'll upgrade our factory 4 pole or pre-existing 4 pole into a 7-pole connector with another 4-pole connector on the outside for our trailer. The first step is to go ahead and install our mounting bracket for a 7 pole that comes with the kit. Now in our case, our hitch has a attachment point on it already, so a pretty easy install for this point. Put our bracket in place, and we'll install the hardware that comes with it. more
9/23/2014 2:21:13 PM
Trailer Wiring Harness Adapter Installation - 2010 Toyota Tundra- Video
Today on this 2010 Toyota Tundra pickup, we are going to install part number 37185. Also, we are going to use an install bracket, part number 118136 from Tow Ready. In this case what we are going to do is we have our factory 4-pole lose from the vehicle. Our 7 and 4-pole down to our 4-pole adapter is going to go on the end of this. Now we will take a few minutes to do some test fitting here because it is kind of close between the hitch and the bumper. So, we use our bracket. We can mount it this way or we can mount it this way. And we can mount it just like this. It does stick out kinda far. So what we can do is we can just take this bracket and flip it around. And if we are installing it backwards, it actually recesses a little bit. It sits a little tighter against the hitch and it is not the only thing that is sticking out further than the hitch itself. 1:00 more
12/21/2009 6:36:17 PM
Filter Videos
Filter Videos
