Volvo S60 Trailer Hitch Installation And Review Videos

Trailer Hitch Installation - 2014 Volvo S60- Video

Today on our 2014 Volvo S60, we're going to be taking a look at and installing the Kirk Class 2 Custom Fit Trailer Hitch Receiver, Part Number C12066. Here's what our hitch looks like fully installed on our S60. As you can see, all you're going to see sticking out is going to be the receiver tube right underneath the bumper. The cross tube's going to be tucked up underneath here, so it's going to give that nice, clean, finished look. This is a Class 2 hitch, so it's got an inch and a quarter by inch and a quarter receiver two opening, and it's going to have that reinforced collar here. Now the safety chain loops here, it's going to be a rolled steel stock welled into the bottom of our receiver tube. As you can see, we're going to have plenty of room to get any size loop on or off. This hitch is going to use a standard 1/2 inch pin in clip hole. more

3/1/2017 1:59:22 PM

Trailer Hitch Installation - 2008 Volvo S60 - Draw-Tite- Video

Today on our 2008 Volvo S60 we're going to be taking a look at and showing how to install the Draw-Tite custom fit class two trailer hitch receiver. This is going to offer the 1-1/4" opening. Its part number is 36297. Now here's what the hitch is going to look like once it's installed on the vehicle. As you can see, it's pretty straight across, very symmetrical so it's not going to look odd here in the rear of the vehicle. It's a square bar design. more

4/22/2015 1:51:06 PM

Trailer Hitch Installation - 2006 Volvo S60 Sedan- Video

Today on this 2006 Volvo S60 Sedan we are going to be installing part number 36297 from Draw-Tite. The first thing we need to do is remove the tow bracket on the passenger side of the vehicle. Keep a hold of the bolts, but put the tow bracket off to the side because we are going to be using the bolts for the installation. Now we are going to go to the driver side of the vehicle and lower down the exhaust bracket. We are also going to be putting our hitch in that position using the exhaust bracket bolts. :32 more

6/22/2010 2:29:52 PM