Summer Starts Here - Save up to 70%
Trailer Hitch Installation - 2008 Honda Element - Curt- Video
Today on our 2008 Honda Element we're going to be installing the CURT Trailer Hitch Receiver, part number 13574. Now here's what our hitch looks like installed on our vehicle. Now we'll go ahead and give you a couple measurements in helping you choose some accessories for your hitch, such as a ball mount, a bicycle rack, or a cargo carrier. From the center of the hitch pinhole to the outermost edge of the bumper is approximately 3". From the top of the opening in the receiver to the ground is approximately 13". Now let's go ahead and install our hitch. Now we'll begin our installation here by pointing out our mounting locations underneath the vehicle. There will be a total of five mounting locations. more
10/21/2014 1:33:09 PM
Trailer Hitch Installation - 2005 Honda Element- Video
Today in our 2005 Honda Element. We'll be installing the draw-tite hitch, part number 75659. Here's what our hitch looks like installed on a vehicle. Now, we'll go ahead and give you a couple of measurements in helping you choose some accessories for your hitch such as a ball mount, bicycle rack or cargo carrier. From the center the hitch and hole to the edge of the bumper is approximately three inches and from the top of the opening on the hitch to the ground is approximately thirteen and a half inches. Now let's go ahead and install our hitch. more
10/14/2014 2:54:49 PM
Trailer Hitch Installation - 2005 Honda Element 24720- Video
Okay we are going to do an install on a Honda element using part number 24720. We will take out all the spare tire and the plastic so we can actually do the install. Okay we will go ahead and clean out the trunk area and then get down to the spare tire and take that apart. What well do next is tighten this down just enough to snug it to hold it in place, and then well see where to drill or holes out using the hitch as a template. more
7/23/2008 12:12:48 PM
Filter Videos
Filter Videos
