Summer Starts Here - Save up to 70%
Draw-Tite Max-Frame Trailer Hitch Installation - 2019 GMC Canyon- Video
Connor: Hey everybody, Connor here today at etrailer.com. Today, we're going to be going over and showing you how to install the Draw- Tite Trailer Hitch Receiver here for our 2019 GMC Canyon. So this is what our trailer hitch is going to look like installed. As we can see here, it has a nice hidden design, which means that we're not going to see the cross tube protruding down below the bumper. The only thing we're going to see here is the receiver tube opening, which has a nice collar around it, as well as the overall trailer hitch has that shiny black powder coated finish, so it's going to protect it from rust.So our hitch here is going to have a Class 3 rating with a two-inch receiver tube opening. Now this is going to allow us to do many different things. more
11/20/2020 2:42:57 PM
Draw-Tite Max-Frame Trailer Hitch Installation - 2019 GMC Canyon 75948- Video
Bob here at etrailer.com and today you're going to be taking a look at the draw tight class three custom fit trailer hitch receiver on our 2019 GMC Canyon. Now here's what our hitch is going to look like once we have it installed. The crosstube is going to sit right below the bumper, but the main thing we're going to see is that receiver tube sticking out. Now it's a class three so it is going to give us that two inch by two inch receiver tube opening and have the widest variety of options when it comes to accessories. If you want to hit the trail, we can put a bike rack in here, put a couple of bikes and we can take our friends with us. Or maybe we need to make more space inside of the bed or cabin of our truck. more
9/11/2019 10:12:25 AM
Curt Trailer Hitch Installation - 2019 GMC Canyon- Video
Rob: Rob here at etrailer.com. Today, we're going to be taking a look at the Curt class three custom fit trailer hitch receiver on our 2019 GMC Canyon. Now here's where our hitch is going to look like once we have it installed. The cross tube is going to be completely be hidden behind the bumper and the only thing we're going to see really is that receiver tube sticking out. Since it's a class three, it's going to give us that two inch by two inch receiver tube opening and have really the widest variety of accessories when it comes to options we can put in there.Whether we want to take some bikes with us, we can put a bike rack in there, make some room on the inside of the cabin or the bed with the cargo carrier, or maybe we need to carry some really long gated gear and we can get a bed extender, or maybe we just need to move a trailer. You're going down to the lake to have some fun with a jet ski, a boat, or pull a camper. more
9/10/2019 1:12:17 PM
Trailer Hitch Installation - 2004 GMC Canyon - Curt- Video
All right today on this 2004 GMC Canyon, we are going to install part number 13252 from Kirk. This is what the hitch looks like once installed on a truck. Next we'll give you some measurements to help you out in selecting some accessories such as a ball mount, a bicycle rack or a cargo carrier. From the top of the receiver opening down to the ground will be about 16 inches and from the center of our hitch pin hole to the edge of the bumper is around 1 5/8 inches. Now we'll go ahead and show you how the hitch is installed. First thing we need to do is go ahead and remove 2 bolts, one on each side, these are the bolts that are part of the bumper bracket going into the frame we'll completely remove. Next we'll go ahead and take a couple of washers there will be a thick one and a thin one that we are going to tape to the inside edge of the bumper bracket. more
11/4/2014 1:51:17 PM
Trailer Hitch Installation - 2004 GMC Canyon - Draw-Tite- Video
Today on this 2004 GMC Canyon we're going to install part number 75607 from Draw-Tite. This is their class three 2" receiver hitch. This is what the hitch looks like when it's installed on the truck. Next we'll give you some measurements to help you out in selecting some accessories, such as a ball mount, a bicycle rack, or a cargo carrier. From the top of the receiver opening down to the ground will be about 15". From the center of the hitch pinhole to the edge of the bumper will be about 4-3/4". more
11/1/2014 10:49:31 AM
Filter Videos
Filter Videos
