Summer Starts Here - Save up to 70%
Trailer Hitch Installation - 2008 Chrysler Sebring - Draw-Tite- Video
Today on our 2008 Chrysler Sebring we'll be installing Draw-Tite hitch, part number 24871. Here's what our hitch looks like installed on our vehicle. Now we'll go ahead and give you a few measurements to help you select some accessories for your hitch such as a ball mount, bicycle rack, or cargo carrier. From the center of the hitch pinhole to the edge of the bumper is approximately 8". From the top of the opening of the receiver to the ground is approximately 11". Now let's go ahead and install our hitch. Now here's the hardware that we'll use for each side. more
1/8/2015 1:33:15 PM
Trailer Hitch Installation - 2001 Chrysler Sebring - Draw-Tite- Video
Today on our 2001 Chrysler Sebring convertible well be installing the DrawTight Sportframe trailer hitch receiver in a class 1 with an inch and a quarter opening part #: 24711. Heres what our hitch looks like installed on our vehicle. Now well go ahead and give you a couple of measurements in helping you choose some accessories for your hitch such a bicycle rack or a cargo carrier. From the center of the hitch pinhole to the outermost edge of the bumper is approximately eight and a half inches. From the top of the opening of the receiver to the ground is approximately 12 and a quarter inches. Now lets go ahead and install our hitch. more
10/25/2013 9:23:53 AM
Trailer Hitch Installation - 2001 Chrysler Sebring- Video
Today on this 2001 Chrysler Sebring we are going to install part number 60947 from Hidden Hitch. This is what the hitch looks like when it is installed on the vehicle. Now we will give you some measurements that will help you out in ing some accessories for this such as a ball mount, a bicycle rack or a cargo carrier. From the center of the hitch pin to the outside edge of the bumper itself is going to be 5-3/4 inches. And from the top of the receiver tube down to the ground is going to be 11 inches. Now we will go ahead and show you how the hitch gets installed. 0:28 more
6/2/2011 10:32:20 AM
Trailer Hitch Installation - 2008 Chrysler Sebring- Video
Today on this 2008 Chrysler Sebring Sedan we will be installing Draw-Tite hitch part number 36448. This installation will also apply to Hidden Hitch part number 90166. Starting off underneath the vehicle, the first thing we are going to do is lower the exhaust down. We just want to remove this rear most hanger on the passenger side. :22 more
8/25/2010 4:07:32 PM
Filter Videos
Filter Videos
