Buick Regal Trailer Hitch Installation And Review Videos

Trailer Hitch Installation - 2014 Buick Regal - Draw-Tite- Video

Speaker 1: Today in our 2014 Buick Regal, we're gonna be taking a look at and showing you how to install the Draw-Tite Custom Fit Class II Trailer Hitch Receiver, part number 36538. Here's what your hitch is gonna look like once you have it installed. It is a Class II hitch, which means it's gonna give us that inch and a quarter by inch and a quarter receiver tube opening. As you can see, it's gonna have that nice reinforced collar, not only giving it added strength but a nice, clean finished look.The hitch is gonna sit just slightly below the bumper, but what's nice is it's gonna blend in with the black plastic that's at the bottom of our fascia. Your hitch is gonna use a standard half-inch fitting clip to mount any of your accessories. Now it's not included, but you can pick one up on our website using part number PC2.The safety chain loops are gonna be a plate-style, wells at the bottom of the receiver tube here. more

3/7/2018 1:32:11 PM

Trailer Hitch Installation - 2000 Buick Regal - Draw-Tite- Video

Today on our 2000 Buick Regal we'll be installing the Draw-Tite Sportframe Trailer Hitch Receiver, part number 24660. To begin our installation we'll go ahead and open the trunk and remove the spare tire from the vehicle. With the spare tire removed you'll notice that there are two rubber plugs. We'll go ahead and remove these two rubber plugs. We'll then go ahead and test fit the square block, making sure that the square holes in the block line up with the holes on our vehicle. Before installing this block we'll go ahead and use some black silicone, work around the holes with the silicone to make sure that they seal up tight after we install our block. more

12/19/2014 2:39:29 PM