Summer Starts Here - Save up to 70%
Trailer Hitch Installation - 2007 Acura TSX - Curt- Video
Today on our 2007 Acura TSX we're going to take a look at and also show you how to install the CURT custom-fit class 1 trailer hitch receiver. This offers the 1-1/4" by 1-1/4" receiver tube opening opening. Its part number is C11455. Here's what our hitch is going to look like installed. See we've got our square tube that comes across from our side plates here. It's going to meet at our receiver tube opening. This is an 1-1/4" by 1-1/4" opening. more
1/3/2017 2:53:07 PM
Trailer Hitch Installation - 2007 Acura TSX - Draw-Tite- Video
Today on our 2007 Acura TSX we're going take a look at and also show you how to install the Draw-Tite Sports Frame trailer hitch receiver. This custom-fit class 1 hitch offers the 1-1/4" by 1-1/4" opening. Its part number is 24768. Now this is what our hitch is going to look like installed. See we've got our crosstube. It's going to run the width of the rear here between the side plates. more
1/3/2017 2:52:50 PM
Trailer Hitch Installation - 2006 Acura TSX - Curt- Video
Today in our 2006 Acura TSX we will be reviewing and installing the CURT Custom Fit Class 1 Trailer Hitch Receiver, part number C11455. This is what our hitch will look like once it's installed. It's going to have that nice sleek look and low-profile drag against the back side of the vehicle. You're going to see that the angled brackets down here on the bottom will come down along the bottom to help give you a little bit of extra support. It's going to be fully welded all the way throughout. It's going to have that black powder coat finish that's going to help prevent any kind of rust and corrosion as well as your chain tie-downs and one and a quarter by one and quarter inch receiver tube with a half inch pinhole going all the way through. This hitch is going to be capable of 200 pounds, ton weight capacity, and 2,000 towing capacity. more
12/3/2015 12:57:21 PM
Trailer Hitch Installation - 2012 Acura TSX - Draw-Tite- Video
On this 2012 Acura TSX, we're going to review and install part number 24899. This is a Class I Receiver Hitch from Draw-Tite. This is what the hitch looks like when it's installed on the TSX. You can see at first glance it does fit underneath the bumper so you do see most of the hitch. However, it's got a kind of a cool angled shape to it so it goes back underneath and behind the bumper to its attachment points. This is our 1 1/4" opening up front right here and it uses a 1/2" diameter hitch pin or your favorite locking pin. more
10/16/2015 1:06:17 PM
Trailer Hitch Installation - 2011 Acura TSX - Draw-Tite- Video
Today on our 2011 Acura Txc we're going to be installing the Draw-Tite Sport Frame trailer hitch receiver. This is a custom fit class one with an 1-1/4" opening. Part number is 24899. This is what your hitch will look like once we've got it installed in the vehicle. Now now we're going to go over a few measurements. These are going to help you in selecting a ball mount, bike rack, or any other accessory you might want to add to your hitch. more
2/5/2015 1:31:51 PM
Filter Videos
Filter Videos
