Chevrolet Cobalt Tow Bar Wiring Installation And Review Videos

Roadmaster Diode 7 to 6 Wire Coil Kit Installation - 2010 Chevrolet Cobalt- Video

Ryan: Hey everybody. Ryan here at etrailer. Today on our 2010 Chevrolet Cobalt, we're going to be taking a look at and showing you how to install the Roadmaster Diode Wiring kit. To flat tow your Cobalt down the road, there's going to be five main components that you're going to need. First one being the base plate, which gives us a solid connection point to hook up our tow bar to. The tow bar is going to be that second component. more

4/10/2020 7:52:23 AM

Roadmaster FuseMaster Fuse Bypass Switch Installation - 2010 Chevrolet Cobalt- Video

Hey everybody. Ryan here at etrailer. Today on our 2010 Chevrolet Cobalt we're going to be taking a look at and showing you how to install the Roadmaster fuse bypass switch.So the purpose of the fuse bypass switch is really simple. Whenever we go to flat tow our Cobalt, it's going to require us to remove a fuse every time we do that. And then you got to remember to put it back in whenever you're done flat towing. Well, the switch eliminates the need to do that, as opposed to having to pull that fuse out and put it in every time, we're simply just going to have to push a button. more

4/8/2020 11:32:30 AM

RoadMaster Bulb and Socket Set Installation - 2010 Chevrolet Cobalt- Video

Today on our 2010 Chevrolet Cobalt, we're installing our Roadmaster Bulb and Socket set. Part number RM-155-2. Our first step is to take our tail light off. We've got two screws here and then on the inside we'll have to remove our carpet. I'll start with these. Next there's a plastic nut right here. We'll loosen that. more

11/17/2015 11:53:34 AM