Thule AeroBlade Podium Roof Rack Installation - 2012 Mazda 5- Video
Today on our 2013 Mazda 5, We'll be test fitting the Thule Rapid Podium Roof Rack System using Part Numbers THARB47, TH460R, and THKIT3080. With our roof rack system assembled according to the instructions, we'll begin our test fit by removing the fix mounting covers over each mounting point. We'll then take our bolts and screw those into position. We'll use an allen key to tighten each one of those down. Then we'll go around and install our sleeves over each bolt. We'll take our front bar and place it onto the front part of our roof. We may need to adjust the feet to fit the fixed mounting points so that we have even bar overhang on each side. more
1/16/2014 4:51:36 PM
Thule Podium Roof Rack Installation - 2012 Mazda 5- Video
Today on our 2012 Mazda 5, well be test fitting the Thule Square Bar Podium Style Roof Rack System using part numbers THLB50, TH460, and THKIT3080. With our roof rack system assembled according to the instructions, well begin our test fit by removing the tabs that cover up our fixed point mounts on our vehicle. Then well take our bolts and screw them into position using an allen key to secure them. Well take our bolt sleeves and slide them over each bolt. Well grab our front bar and place it onto the front part of our roof making sure that the bolts go through the holes in the center of our foot packs. Well grab our rear bar and repeat this process. more
11/6/2013 3:53:31 PM
Thule AeroBlade Podium Roof Rack Installation - 2010 Mazda 5- Video
Today on our 2010 Mazda 5 well be test fitting a Thule Roof Rack System. Well be using the 47-inch Aeroblade Load Bars part number THARB47, the Rapid Podium Feet part number TH460R and the Fit Kit for our Mazda which is part number THKIT3080. We already have our bars put together according to the instructions so now were ready to mount them up to our vehicle. The first thing we need to do is remove the covers over the fixed points at all four corners of the vehicle. With the covers out of the way we can install our studs. Well thread our studs into the vehicle and tighten them down to the shoulder. more
9/21/2012 2:02:27 PM
Filter Videos
Filter Videos
