Thule Crossroad Roof Rack Installation - 2008 Jeep Liberty- Video
Today on our 2008 Jeep Liberty well be test fitting the Thule Crossroads Roof Rack System part numbers CHLB58 and CH450. Well begin our test fit by placing the front load bar onto the front of our roof. This vehicle is equipped with raised side rails so well make sure that the distance between the connection point of the raised side rail and the roof and the first part of our foot is equal on both sides. We also want to make sure the overhang of the load bar is equal on both sides as well. Once weve established this position we can pop off the end caps to bring the rubber coated steel straps around the underside of the raised side rail. Well then hook them into the connection points and turn the black bolt to bring the straps up around each bar. more
8/12/2013 2:15:31 PM
Thule Crossroad Roof Rack Installation - 2012 Jeep Liberty- Video
Today, on our 2012 Jeep Liberty, we'll be test-fitting the Thule Crossroads Roof Rack System, using part numbers th450 and thlb58. Now, we've already gone ahead and pre-assembled our crossbars according to the instructions, so we're ready to fit it to the vehicle. We'll place our front crossbar on top of our factory raised side-rails. We'll then need to take a measurement. We'll measure from a fixed point on the side rails back to the crossbars. We'll do this on both sides of the vehicle, to ensure that the crossbar is perpendicular with the two-side rails. more
4/25/2013 8:21:02 AM
Thule AeroBlade Crossroad Roof Rack Installation - 2012 Jeep Liberty- Video
Today on our 2012 Jeep Liberty, we'll be test fitting the Thule Rapid Crossroads roof rack system, using part numbers THARB53 and TH450R. Now to begin our test fit, we've already gone ahead and assembled the cross bars according to the instructions, so we'll start by placing the front cross bar on top of our factory-raised side rails. Now we'll want to make sure that the rubber-coated steel strap goes underneath the side rail, as this is how the foot attaches to it. We'll now take a measurement from a fixed location on the side rail. We'll do this on both sides of the vehicle to ensure that the cross bar is perpendicular with the side rail, making it easier to load your accessories. We can then take the included Allen tool found within each foot and tighten down the Allen bolt securing our cross bar to the vehicle. more
4/25/2013 8:20:26 AM
Thule AeroBlade Crossroad Roof Rack Installation - 2006 Jeep Liberty- Video
7/26/2012 1:17:37 PM
Filter Videos
Filter Videos
