Inno Aero Crossbars Review - 2019 Ford Flex- Video
Hey everyone, how's it going Today, we're gonna be going over the Inno raised rail crossbar system with through feet for a 2019 Ford Flex. So roof racks are very versatile. They're definitely a great addition to your Flex here because they allow you to do a number of different things. Whether you like to get out on the water, you could easily throw a couple kayaks up there or you have a large family and you're taking a road trip and you need more space. You could put a cargo box or a cargo basket. The possibilities are really endless here with this roof rack system. more
8/30/2022 1:43:18 PM
Inno Roof Rack Installation - 2018 Ford Flex- Video
Today, in our 2018 Ford Flex, we're going to be doing a test on the Inno Square Bar Roof Rack System.We'll be using part numbers INB147 for the 58 inch long black steel crossbars, and part number INSUT for the Inno feet for the square crossbars. Part number INK263 for the customer fit kit.This Inno roof rack system's going to allow us to carry roof mounted accessories on our Ford Flex. Things like bike racks, kayak carriers, roof boxes, and much more.It has the traditional square bar design. Now, these aren't going to be as quiet as an aero style. Like anything we put on a roof, it's going to make a little bit of noise. If you'd like to keep that down to a minimum, you can pick up a fairing to place on the front crossbar.Now, as I said in the intro, the bars are 58 inches long. more
1/14/2019 10:17:12 AM
Thule AeroBlade Crossroad Roof Rack Installation - 2014 Ford Flex- Video
Today on our 2014 Ford Flex we're going to be test fitting the Thule Rapid Crossroad's Roof Rack System with the 53-inch Aeroblades. We'll use part number THARB53 and TH450R. With our rack assembled according to the manufacturer's instructions, we'll begin our test fit by placing the front half of our roof rack onto the front portion of our side rails. We'll need to find a fix point to use for reference on both sides. In this case, we'll use the intersection where the gray side rail meets the black foot pack. We're going to position our bar right on this intersection and we're going to do this on both sides to be sure that we have our feet in line with one another. With our feet in line, we'll check for even bar overhang, we'll pull the cap off the end of the foot pack, which also acts as the included tool. more
7/1/2014 8:21:29 AM
Yakima Q Tower Roof Rack Installation - 2009 Ford Flex- Video
Today on our 2009 Ford Flex, well be test fitting the Yakima round bar roof racking system, part number Y00409, Y00731 and Y00124. Now with our Q towers, Q clips and round bars already assembled according to the instructions. Well begin our test fit by placing the front crossbar on to the front of the vehicle. Well then need to measure from the front part of the glass to the first part of the tower, as stated in to the instructions this measurement is 20 inches. Well measure this on both the passenger and driver side of the vehicle to make sure that the crossbar is perpendicular to the vehicle and the pads on the bottom of the Q towers can tour to the root line. Once weve established this position on to the roof, well then turn the silver balls on the interior of the tower, and then clamp down the black plastic caps to secure the towers to the vehicle. more
6/18/2013 4:45:24 PM
Yakima Q Tower Roof Rack Installation - 2011 Ford Flex- Video
Today we have a 2011 Ford Flex and were going to be test fitting the Yakima Roof Rack System. Well be using the 58-inch crossbars part number Y00409, two sets of the Q131 clips part number Y00731, as well as the Q towers part number Y00124. We already have our crossbars assembled according to the instructions so now were ready to mount them up on top of the vehicle. First well open the driver and passenger side front doors and well place the front crossbar assembly up on top of the roof. Well measure 20 inches from the edge of the windshield to the leading edge of the Q towers on both sides of the vehicle. Once we have the crossbar in position we can adjust the thumb screws and clamp down our Q towers. more
8/14/2012 3:09:25 PM
Thule Traverse Roof Rack Installation - 2011 Ford Flex- Video
Today we have with us a 2011 Ford Flex and we're going to be test fitting a Thule Square Load Bar Roof Rack System. We'll be using the 50 inch square load bars part number THLB58, the Traverse Foot Pack part number TH480, as well as the fit kit for our flex which is part number THKIT1518. We already have our load bar assemblies put together according to the instructions so now we're ready to mount them up on our vehicle. To do this first we'll open the passenger and driver's side front doors. We'll take our front load bar assembly and place it up on top. To position the front bar we need to measure 20-7/8 inches from the edge of our windshield to the leading edge of the Traverse Foot on either side of the vehicle. more
8/14/2012 3:08:50 PM
Filter Videos
Filter Videos
