Thule Apex 4 Hitch Bike Rack Review - 2012 Kia Sedona- Video
Today on our 2012 Kia Sedona, we'll be test fitting the Thule Apex 4 Bike Carrier, part number TH9025. To begin our test fit, we'll slide the shank of the carrier into the opening of the hitch, line up our pin holes, and insert the spring loaded pin into the pin hole. We'll then turn the black knob located at the base of the carrier to engage our anti-rattle device. Now, let's go over some clearance measurements to see how the bike carrier and this vehicle will fit together. There is about 11 inches of ground clearance. The closest part of the vehicle to the closest part of the carrier is about 2 inches. more
12/14/2012 1:11:46 PM
Pro Series Q-Slot Hitch Bike Rack Review - 2012 Kia Sedona- Video
Today on this 2012 Kia Sedona were going to do a test fit of part number PS63134. A few things to know about this bicycle rack is that it will work with inch and a quarter receiver hitches, both Class I and Class II. This will also work with two inch receiver hitches with the included spacer. Thats what well be working with today. Well start off our test fit by installing the bike rack into the hitch, then installing the pin and clip. Then well go ahead and get some clearance measurements. more
11/16/2012 1:26:05 PM
Thule Hitching Post Pro Hitch Bike Rack Review - 2012 Kia Sedona- Video
Today on this 2012 Kia Sedona were going to do a test fit of part number TH934XTR from Thule. One thing to know about this bicycle rack is that when you use it with a class one receiver hitch remember to carry just two bicycles. Now to start off our test fit well go ahead and put the bicycle rack into the hitch and then well go ahead and tighten down the anti-rattle bolt. Then well go ahead and get some clearance measurements. From the bumper to the security cable loop on the bike rack the minimum clearance is going to be 5 inches. Ground clearance is going to be about 9 inches. more
11/15/2012 10:48:20 AM
Swagman Titan Hitch Bike Rack Review - 2012 Kia Sedona- Video
Alright, today on a 2012 Kia Sedona were going to do a test fit of part number S63410 from Swagman. This is their titan bicycle rack. A few things to know about this bicycle rack that it will work off an 1-1/4 receiver hitches, both class 1 and class 2 and this will also work with 2 inch receiver hitches with the included spacer and thats what were working with today. Well start off our test fit by installing the bike rack into the hitch and then well tighten down the anti-rattle bolt and put the safety pin on the other side. Then well get some clearance measurements. From the bike rack to the bumper will be about 6 inches as closest point. more
11/15/2012 10:46:28 AM
SportRack Escape 3 Hitch Bike Rack Review - 2012 Kia Sedona- Video
Today on this 2012 Kia Sedona were going to do a test fit of part number A30403 from Sportrack. All right a couple things to know about this bike rack is it will work with an inch and quarter receiver hitches, class two only. This will also work with two inch receiver hitches with the included spacer and thats what well be working with today. Now install for test fit by taking the bicycle rack installing it into the hitch then tighten down the anti-rattle bolt and installing the clip on the other side. Now well go ahead and get some clearance measurements. From the bike rack to the bumper at its closest point will be about two inches. more
11/15/2012 10:45:47 AM
Filter Videos
Filter Videos
