Yakima Hitch Bike Racks Review - 2009 Chrysler Town and Country- Video

Hey everybody, Ryan here at etrailer. Today on our 2009 Chrysler Town and Country we're gonna be checking out the Yakima OnRamp two bike platform rack. So today's age electric bikes or e-bikes some of you may know, are getting more and more popular seeing a lot of people out riding 'em and that presents a problem you know, they're relatively heavy actually. And when you go to load 'em up it can be quite cumbersome and difficult to do especially on a vehicle like the Town and Country. You just don't have a ton of space, you know, clearance-wise. And so really trying to just kind of manage to get in and around everything can be a little bit difficult to do. more

Watch Video

3/16/2022 2:54:32 PM

Thule Hitch Bike Racks Review - 2016 Chrysler Town and Country- Video

Jake: Hey guys, it's Jake here with the trailer. Today we have a 2016 Chrysler Town And Country and we're going to be doing a test fit of the Thule EasyFold XT bike rack. This is going to be a two bike rack that's going to mount to the hitch of your vehicle, to be able to get your bikes to and from the trails. Right off the bat I want to point out a few things that's going to set this bike rack apart from other bike racks. Right now we do not have rear hatch access, so we're not going to be able to access anything that's inside our car. To gain that rear hatch access, we're going to step down on this lever here, push it down until it's disengaged, and then we can lean our bikes with both loaded away in the loaded position. more

Watch Video

6/28/2019 10:07:28 AM

Hollywood Racks Trail-Rider Hitch Bike Racks Review - 2016 Chrysler Town and Country- Video

Today on our 2016 Chrysler Town & Country we're going to be doing a test fit on the Hollywood Racks Trail Rider 2-bike platform-style rack, part number HR200. The bike attaches to the rack in three locations. It's got a frame hook here on top that's padded to help prevent scratching the frame of your bike. Then it's got a wheel cradle at front and back that has a hook and loop fastener that goes over it to strap the wheel down into the cradle. Now let's go ahead and remove this bike so we can check out some of the other features. Squeeze the tab here in order to raise the frame hook. Then we'll undo the hook and loop fasteners. more

Watch Video

11/28/2016 1:19:23 PM

Hollywood Racks Sport-Rider-2 Hitch Bike Racks Review - 2016 Chrysler Town and Country- Video

Today on our 2016 Chrysler Town & Country, we're going to be doing a test fit on the Hollywood Racks Sport Rider 2 Two-Bike Platform Style Rack, part number HR1000. The key feature of this rack is that you're able to tilt it away from the rear of the vehicle in order to gain hatch access when the bikes are mounted on it. In order to do that, you've got these two pins and clips here. You want to remove the smaller pin and clip first and then this larger one, and you can tilt it away. As you can see, that'll not quite gain us full access to our cargo area but enough that we will be able to get anything in or out that we may need. Then when you're done, you simply tilt it back up, reinstall the smaller pin first, and then the larger pin. This rack secures the bike in three locations. First one is the frame hook on top that's padded to help prevent scratching the frame of your bike, and then at the wheel cradle in both front and back, got hook-and-loop fasteners to tie it down. more

Watch Video

11/28/2016 1:19:13 PM

Thule Hitching Post Pro Hitch Bike Rack Review - 2011 Chrysler Town and Country- Video

Today on our 2011 Chrysler Town & Country, we'll be test fitting the Thule Hitching Post Pro, part number TH934XTR. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll thread in our anti-rattle bolt and tighten it with a wrench. With the bike rack secured, we'll go over a few clearance measurements and see how the two fit together. We have about 13 inches of ground clearance at the rear of the bike rack. Closest part of the bike rack to the closest part of the vehicle is about 6 inches, and with the cradle arms folded down, we've added about 15 inches to the overall length of our Chrysler Town & Country. We can now pull the gold pin at the top of the mast to swing the cradle arms out. With the cradles arms out, we've added about 35 inches to the overall length of our vehicle. To access the cargo area, we can pull the gold pin at the base of the bike rack and tilt the mast down. more

Watch Video

5/20/2014 11:21:58 AM

Thule Apex 4 Hitch Bike Rack Review - 2011 Chrysler Town and Country- Video

Today on our 2011 Chrysler Town and Country, well be test fitting the Thule Apex Hitch Mounted Four Bike Rack, part number TH9025. Well begin our test fit by sliding the shank of the bike rack into the opening of the hitch. Well allow the integrated hitch pin to fall into place, and well then turn the black knob to engage the anti-rattle device. With the bike rack secured, well go over a few clearance of measurements to see how the two fit together. We have about 13-1/2 inches of ground clearance at the rear of the bike rack. The closest part of the bike rack to the closest part of the vehicle is about 1 inch away. more

Watch Video

5/14/2014 9:33:09 AM

Hollywood Racks Traveler Hitch Bike Rack Review - 2011 Chrysler Town and Country- Video

Today on our 2011 Chrysler Town & Country we'll be test fitting the Hollywood Racks Traveler Hitch Mounted 4 Bike Rack, part number HR8500. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch, threading in our anti-rattle bolt, and tighten it with a wrench. With the bike rack secured, we'll go over a few clearance measurements to see how the two fit together. We have about 10-1/2" of ground clearance at the rear of the bike rack. Closest part of the vehicle to the closest part of our Town & Country is about 2" away, and we've added about 8" to the overall length of our vehicle with the cradle arms pointing down. We can now pull the black pin at the top of the mast to swing the cradle arms out. With the cradle arms out we've added about 31" to the overall length of our Chrysler. To access the rear hatch we can pull the pin at the base of the bike rack and tilt the mast down. more

Watch Video

5/14/2014 9:31:02 AM

Yakima StickUp 2 Hitch Bike Rack Review - 2011 Chrysler Town and Country- Video

Today on our 2011 Chrysler Town and Country, we'll be test fitting the Yakima Stickup hitch mounted two bike rack part number Y02420. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll thread in our anti rattle bolt and tighten it with the wrench. With the bike rack secured, we'll go over a few clearance measurements to see how the two fit together. With the bike rack folded up, we have about fourteen and a half inches of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about three and a half inches away and we've added about eleven and a half inches to the overall length of our Town and Country. To lower the platform, we can pull the red pin at the base of the bike rack and tilt it down. With the platform folded down, we have about eighteen inches of ground clearance at the rear of the bike rack. more

Watch Video

5/12/2014 3:27:53 PM

Thule Vertex 4 Hitch Bike Rack Review - 2011 Chrysler Town and Country- Video

Today on our 2011 Chrysler Town and County, we'll be test fitting the Thule Vertex hitch mounted for bike rack part number Th9029. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll thread in our anti rattle bolt and tighten it with a wrench. With the bike rack secured, we'll go over a few clearance measurements to see how the two fit together. We have about thirteen inches of ground clearance to the rear of the bike rack. Closest part of the bike rack to the closest part of the vehicle is about three inches away and we've added about ten inches to the overall length of our Chrysler Town and Country. We can now pull the gray lever at the top of the mast to swing the cradle arms out and with the cradle arms out we've added about thirty four inches to the overall length of our Town and Country. To access the cargo area, we can pull the gray lever at the base of the bike rack and tilt the mast down. more

Watch Video

5/12/2014 3:26:04 PM

Thule Helium Aero Hitch Bike Rack Review - 2011 Chrysler Town and Country- Video

Today on our 2011 Chrysler Town and Country, we'll be test fitting the Thule Helium Aero hitch mounted two bike rack part number Th9042. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll allow the integrated hitch pin to fall into place and we'll then turn the black knob to engage the anti rattle device. With the bike rack secured, we'll go over a few clearance measurements to see how the two fit together. We have about seventeen and one quarter inches of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about an inch and a quarter. With the cradle arms pointing down, we've added about sixteen inches to the overall length of our vehicle. We can now pull the gray lever at the top of the mast to swing the cradle arms out and with the cradle arms folded out, we've added about twenty four and a half inches to the overall length of our Town and Country. To access the rear hatch we can pull the gray lever at the base of the bike rack and tilt the mast down. more

Watch Video

5/12/2014 3:25:04 PM

Thule Apex 4 Swing Hitch Bike Rack Review - 2011 Chrysler Town and Country- Video

Today on our 2011 Chrysler Town and Country well be test fitting the Thule Apex Swing hitch mounted four bike rack, part number TH9027. Well begin our test fit by sliding the shank of the bike rack into the opening of the hitch. Well allow the integrated hitch pin to fall into place, and well turn the black knob to engage the anti-rattle device. With the bike rack secured well go ahead and go over a few clearance measurements to see how the two fit together. We have about 12 inches of ground clearance at the rear of the bike rack. The closest part of the bike rack to the closest part of the vehicle is about one inch away. more

Watch Video

5/12/2014 3:23:42 PM

Prorack 4 Hitch Bike Rack Review - 2011 Chrysler Town and Country- Video

Today on our 2011 Chrysler Town and Country we'll be test fitting the Pro Rack hitch mounter four bike rack part number Pr8062404. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll line up our pin holes, thread our anti rattle bolt through the pinholes and tighten it with a wrench. With the bike rack secured, we'll go over a few clearance measurements to see how the two fit together. We have about ten inches of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about four inches away and we've added about twenty eight and a half inches to the overall length of our Town and Country. To access the cargo area, we can pull the silver pin at the base of the bike rack and tilt the mast down. more

Watch Video

5/9/2014 11:12:39 AM

Hollywood Racks Traveler Tow n Go Bike Rack Review - 2011 Chrysler Town and Country- Video

Today on our 2011 Chrysler Town & Country we'll be test fitting the Hollywood Racks Traveler Tow N' Go 3 bike rack, part number HR135. With this test fit we'll be using the Hidden Hitch Super Extra Long Ball Mount, part number 80232. We'll begin our test fit by sliding the shank of the ball mount into the opening of the hitch and securing with a pin and clip, which is also sold separately. To load a bike we'll undo the black pin at the top of the mast and swing out our dual arms. We'll undo the cradle straps, place our bike into the frame cradles, and secure it with the straps. Keep in mind, this bike rack will not allow you to access the rear hatch. Now we'll take the rack out on our slalom course to show you the side to side movement. Then we'll go to our alternating bumps and then to our straight bumps to show you the up and down as well as the side to side movement. That will complete today's test fit for the Hollywood Racks Traveler Tow N' Go, part number HR135, on our 2011 Chrysler Town & Country. more

Watch Video

5/9/2014 11:09:44 AM

Thule Doubletrack Hitch Bike Rack Review - 2011 Chrysler Town and County- Video

Today on our 2011 Chrysler Town and Country well be test fitting the Thule Doubletrack platform style two bike rack, part number TH990XT. Well begin our test fit by sliding the shank of the bike rack into the opening of the hitch. Well thread in our anti-rattle bolt and then tighten it down using a wrench. With the bike rack secure well go over a couple of clearance measurements to see how the two fit together. With the platform folded up we have about 17 inches of ground clearance. The closest part of the bike rack to the closest part of the vehicle is about four and three-quarters of an inch, and weve added about 10 inches to the overall length of our Chysler. more

Watch Video

11/5/2013 10:03:56 AM

Swagman Titan Hitch Bike Rack Review - 2011 Chrysler Town and Country- Video

Today on our 2011 Chrysler Town and Country, we'll be test fitting the Swagman Titan Hitch-Mounted 4 Bike Rack part number S63410. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll line up the pin holes, insert our anti-rattle bolt to the pin holes and tightening it down with a wrench. With the bike rack secured, we'll go over a couple clearance measurements to see how the two fit together. We have about 15 inches of ground clearance for the rear of the bike rack. Closest part of the bike rack to the closest part of the vehicle is about three and a half inches away. more

Watch Video

11/5/2013 9:57:52 AM

Softride Dura Hitch Bike Rack Review - 2011 Chrysler Town and Country- Video

Today, on our 2012 Chrysler Town and Country, we'll be test fitting the SoftRide Dura Parallelogram Tilting 4 Bike Rack part number SR26247. We'll begin our test fit by sliding the shank in the bike rack into the opening of the hitch. We'll line up the pin holes, thread in our anti-rattle bolt, and tighten it with a wrench. Withthe bikerack secured, we'll go over a few clearance measurements to see how the two fit together. We have about 10 1/2 inches of ground clearance. The closest part of the bike rack to the closest part of the vehicle is about two and half inches away. We've added about 32 inches to the overall length of our Town and Country. more

Watch Video

11/5/2013 9:54:31 AM

Pro Series Q-Slot 2 and 4 Bike Hitch Bike Rack Review - 2011 Chrysler Town and Country- Video

Today on our 2011 Chrysler Town & Country we'll be test fitting the Pro Series Q Slot 2 and 4-Bike Rack, part number PS63138. For today's test fit, we'll be showing you with the 2-Bike configuration forthe 2-inch hitch. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll thread in our anti-rattle bolt, and then tighten it down with a wrench. With the bike rack secured, we'll go over a couple clearance measurements to see how the two fit together. We have about 11 inches of ground clearance at the rear of the bike rack. more

Watch Video

11/5/2013 9:47:58 AM

Thule Vertex 4 Hitch Bike Rack Review - 2014 Chrysler Town and Country- Video

Today on our 2014 Chrysler Town and Country, we'll be test grading the Thule Vertex Hitch-Mounted Four Bike Rack, part number TH9025. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll line up our pinholes, thread our anti-rattle bolt through the pinholes and tighten it with a wrench. With the bike rack secure, we'll go over a few clearance measurements to see how the two fit together. We have about 14 inches of ground clearance at the rear of the bike rack. The closest part of the bike rack to the closest part of the vehicle is about 2 inches away, and we've added about 9-1/2 inches to the overall length of our vehicle with the cradle arms folded down. We can now pull the gray lever at the top of the mast to swing the cradle arms out. With the cradle arm out we've added about 33 inches to the overall length of our Town and Country. To access the cargo area we can lift up the gray lever at the base of the bike rack and tilt the mast down. more

Watch Video

10/28/2013 2:15:47 PM

Kuat Sherpa Hitch Bike Rack Review - 2014 Chrysler Town and Country- Video

Today on a 2014 Chrysler Town and Country, we'll be test fitting the Kuat Sherpa Hitch-Mounted Aluminum 2 Bike Rack part number S102. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll line up our pin holes, enter the pin through the pin holes and secure over the lock in their side. We can then turn the black T-handle to engage the anti-rattle device. With the bike rack secured, we'll go over a few clearance measurements to see how the two fit together. We have about 15 and a half inches of ground clearance at the rear of the bike rack. Closest part of the bike rack to the closest part of the vehicle is about a quarter of an inch away. more

Watch Video

10/28/2013 2:08:24 PM

Hollywood Racks Traveler Tow n Go Bike Rack Review - 2014 Chrysler Town and Country- Video

Today on our 2014 Chrysler Town & Country we'll be test fitting the Hollywood Racks Tow N' Go Ball Mounted 3-Bike Rack part number HR135. For today's test fit we'll be using the hidden hitch ball mount with a super extra long shank part number 80232. We'll begin our test fit by sliding the shank of the ball mount into the opening of the hitch and securing it with a pin and clip. Remember the ball mount and the pin and clip are sold separately. With the ball mount secured, we'll go ahead and show you how to load up a bike. We'll pull out the black pin at the top of the mast to swing the cradle arms out. more

Watch Video

10/28/2013 1:55:50 PM

Thule Hitching Post Pro Hitch Bike Rack Review - 2014 Chrysler Town and Country- Video

Today on our 2014 Chrysler Town & Country, well be testing fitting the Thule Hitching Post Pro part number TH934XTR. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll line up our pin holes, thread our anti-rattle bolt through the pin holes and tighten it with a wrench. With the bike rack secured, we'll go over a few clearance measurements to see how the 2 fit together. We have about 14 inches of ground clearance at the rear of the bike rack. The closest part of the bike rack to the closest part of the vehicle is about 6 inches away and we've added about 14 inches to the overall length of our Chrysler with the cradle arms folded down. more

Watch Video

10/28/2013 12:39:35 PM

Thule Helium Aero Hitch Bike Rack Review - 2014 Chrysler Town and Country- Video

Today on our 2014 Chrysler Town and Country well be test fitting the Thule Helium Aero hitch mounted two bike rack, part number TH9042. Well begin our test fit by sliding the shank of the bike rack into the opening of the hitch. Well allow the integrated hitch pin to fall into place and well then turn the black knob to engage the anti-rattle device. There is a small tab on the top of the shank that does barely come in contact with the underside of the rear bumper fascia. This may vary due to the style of your hitch. With the bike rack secured well go over a couple of clearance measurements to see how the two fit together. more

Watch Video

10/28/2013 12:39:35 PM

Thule Doubletrack Hitch Bike Rack Review - 2014 Chrysler Town and County- Video

Today on our 2014 Chrysler Town & Country, we'll be test screening the Thule Doubletrack hitch-mounted platform style two-bike rack, part number TH990XT. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll line up the pinholes, thread our anti-rattle bolt through the pinholes, and tighten it down with a wrench. With the bike rack secured, we'll go over a couple clearance measurements to see how the two fit together. With the platform folded up, we have about 18 inches of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about 2-1/2 inches away, and we've added about 9 inches to the overall length of our vehicle. We can now pull the gray lever at the base of the bike rack and tilt the platform down. more

Watch Video

10/28/2013 12:39:35 PM

Swagman Titan Hitch Bike Rack Review - 2014 Chrysler Town and Country- Video

Today on our 2014 Chrysler and Town and Country, we'll be test fitting the swagman titan hitch mounted four bike rack, part number S63410. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll thread in our anti-rattle bolt and tighten it down with a wrench. With the bike rack secured, we'll go over a couple clearance measurements to see how the two fit together. We have about 16 1/2" of ground clearance at the rear of the bike rack. The closest part of the bike rack to the closest part of the vehicle is about 6 1/2" away. With the cradle arms down, we've added about 18" to the overall length of our Chrysler. more

Watch Video

10/28/2013 12:39:35 PM

Softride Dura Hitch Bike Rack Review - 2014 Chrysler Town and Country- Video

Today on our 2014 Chrysler Town and Country, we'll be test fitting the Softride Dura Parallelogram tilting four bike rack, part number Sr26247. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll line up our pin holes, thread our anti-rattle bolt through the pin holes and then tighten it down with a wrench. With the bike rack secure, we'll go over a few clearance measurements to see how the two fit together. We have about 12 inches of ground clearance at the rear of the bike rack. Closest part of the bike rack to the closest part of the vehicle is about four inches away and we've added about 32 inches to the overall length of our Town and Country. To load up a bike, we'll simply undo the cradle straps, place our bike into the frame cradles and then secure it with the straps. Now, one great feature of this bike rack is that it has the ability to tilt down with the bike loaded to give you access to your rear hatch. more

Watch Video

10/28/2013 12:39:35 PM

Rhino-Rack 4 Hitch Bike Rack Review - 2014 Chrysler Town and Country- Video

Today on our 2014 Chrysler and Town and Country, we'll be test fitting the rhino rack, hitch mounted four bike rack, part number RBC038. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll thread in our anti-rattle bolt and tighten it down with a wrench. With the bike rack secured, we'll go over a couple clearance measurements to see how the two fit together. We have about 15" of ground clearance at the rear of the bike rack. The closest part of the bike rack to the closest part of the vehicle is about 3 1/2" away, and we've added about 10 1/2" to the overall length of our Chrysler with the cradle arms pointing down. We can now pull the black pin at the top of the mast and swing the cradle arms out. more

Watch Video

10/28/2013 12:39:35 PM

Prorack 4 Hitch Bike Rack Review - 2014 Chrysler Town and Country- Video

Today on our 2014 Chrysler Town and Country we'll be test fitting the Pro-Rack hitch-mounted 4-bike rack, part number PR8062404. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll thread in our anti-rattle bolt, and then tighten it down using a wrench. With the bike rack secured, we'll go over a couple clearance measurements to see how the 2 fit together. We have about 11-1/2 inches of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about 3 inches. more

Watch Video

10/28/2013 12:39:35 PM

Pro Series Q-Slot 2 and 4 Bike Hitch Bike Rack Review - 2014 Chrysler Town and Country- Video

Today on our 2014 Chrysler and Town and Country, we'll be test fitting the pro series, Q slot, platform style two and four bike carrier, part number PS63138. For today's test fit, we'll be using the two bike figuration for a 2" hitch. Well slide the shank of the bike rack into the opening of the hitch, thread in our anti-rattle bolt, and tighten it down using a wrench. With the bike rack secured, we'll go over a couple clearance measurements to see how the two fit together. We have about 12" of ground clearance at the rear of the bike rack. The closest part of the bike rack to the closest part of the vehicle is about 2" away, and we've added about 23" to the overall length of our Town and Country. We can pull the three silver pins at the base of the bike rack to tilt down the wheel cradles as well as the mast. As you can see, we can easily access the rear hatch. To load a bick, we'll make sure that the mast is in its upright position. more

Watch Video

10/28/2013 12:39:34 PM

Hollywood Racks Traveler Hitch Bike Rack Review - 2014 Chrysler Town and Country- Video

Today, on our 2014 Chrysler Town and Country, we'll be test fitting the Hollywood Racks Traveler, pitch-mounted four bike rack, part number HR8500. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch, while threading our anti-rattle bolt and tightening it down with a wrench. With the bike rack secured, we'll go over a few clearance measurements to see how the two fit together. We have about twelve inches of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about one inch away. With the cradle arms folded down, we've added about seven inches to the overall length of our Chrysler. more

Watch Video

10/25/2013 4:00:33 PM

Yakima StickUp 2 Hitch Bike Rack Review - 2010 Chrysler Town and Country- Video

Today on our 2010 Chrysler Town and Country, we'll be test fitting the Yakima StickUp 2-bike hitch-mounted folding rack, part number Y02420. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole, and thread in our anti-rattle bolt, tightening it with a wrench. Now we'll go over some clearance measurement. We have about 11" of ground clearance. The closest point of the carrier to the rear of our Town and Country is about 2-1/2". We've added about 13" to the overall length of our vehicle. more

Watch Video

7/19/2013 2:46:48 PM

Yakima DoubleDown Ace Hitch Bike Rack Review - 2010 Chrysler Town and Country- Video

Today on our 2010 Chrysler Town and Country, we'll be test fitting the Yakima DoubleDown Ace 4-bike carrier for 1-1/4" and 2" hitches, part number Y02451. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole, and install our attached pin. We'll move to the rear of the shank and use the hand knob to secure our bike rack to our vehicle and engage our anti-rattle device. Now we'll go over some clearance measurements. We have about 10" of ground clearance. The closest point of the carrier to the rear of our Town and Country is about 4", and we've added about 11" to the overall length of our Town and Country. more

Watch Video

7/19/2013 2:41:54 PM

Thule Helium Aero Hitch Bike Rack Review - 2010 Chrysler Town and Country- Video

Today on our 2010 Chrysler Town and Country, we'll be test fitting the Thule Helium Aero 2-bike carrier for 1-1/4" and 2" hitches, part number TH9042. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole, and allow our attached pin to fall in place. Then we'll move to the rear of the shank and use the hand knob to secure our bike rack to our vehicle and engage our anti-rattle device. Now we'll go over some key measurements. We have about 14" of ground clearance. The closest point of the carrier to the rear of our Town and Country is about 1/2". more

Watch Video

7/19/2013 2:31:58 PM

Thule Apex 4 Swing Hitch Bike Rack Review - 2010 Chrysler Town and Country- Video

Today on our 2010 Chrysler Town and Country, we'll be test fitting the Thule Apex Swing 4-bike carrier for 2" hitches, part number TH9027. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole, and allow our attached pin to fall into place. Then we'll move to the rear of the shank and use the hand knob to secure our bike rack to our vehicle and engage our anti-rattle device. Next, we'll go over some clearance measurements. We have about 10-1/2" of ground clearance. The closest point of the carrier to the rear of our vehicle is about 1/4". more

Watch Video

7/19/2013 2:29:38 PM

Swagman Titan Hitch Bike Rack Review - 2010 Chrysler Town and Country- Video

Today on our 2010 Chrysler Town and Country, we'll be test fitting the Swagman Titan 4-bike rack for 1-1/4" and 2" hitches, part number S63410. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole, and thread in our anti-rattle bolt, tightening it with a wrench. Now we'll go over some clearance measurements. We have about 13-1/2" of ground clearance. The closest point of the carrier to the rear of our Town and Country is about 1". And we've added about 19" to the overall length of our vehicle. more

Watch Video

7/19/2013 2:27:51 PM

Softride Dura Hitch Bike Rack Review - 2010 Chrysler Town and Country- Video

Today on our 2010 Chrysler Town and Country, we'll be test fitting the Softride Dura Parallelogram tilting 4-bike rack for 1-1/4" and 2" hitches, part number SR26247. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole, and thread in our anti-rattle bolt, tightening it with a wrench. We can go ahead and install the lock as well. Now we'll go over some key measurements. We have about 10-1/2" of ground clearance. We've added about 32" to the overall length of our Town and Country. more

Watch Video

7/19/2013 2:23:53 PM

Kuat Sherpa Hitch Bike Rack Review - 2010 Chrysler Town and Country- Video

Today on our 2010 Chrysler Town and Country, we'll be test fitting the Kuat Sherpa aluminum, platform-style, hitch-mounted 2-bike rack, part number S102. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole, and install our pin and lock. We'll move to the rear of the shank and tighten the hand knob, securing our bike rack to our vehicle, and engaging our anti-rattle device. Now we'll go some key measurements. We have about 14" of ground clearance. The closest point of the carrier to the rear of our Town and Country is about 1". more

Watch Video

7/19/2013 2:19:50 PM

Thule Vertex 4 Hitch Bike Rack Review - 2013 Chrysler Town and Country- Video

Today on our 2013 Chrysler Town and Country, well be test fitting the Thule Vertex 4 Bike Carrier, part number TH9029. Now to begin our test fit, well slide the shank of the carrier into the opening of the hitch, align up our pinholes, thread our anti-rattle bolt through the pinhole and tighten with a wrench. Now well go ahead and go over a few clearance measurements to see how the bike carrier and this vehicle will fit together. There is about ten inches of ground clearance. The closest part of the vehicle to the closest part of the carrier is about two inches. With the cradle arms folded down, weve added about 11 inches to the overall length of the vehicle. more

Watch Video

2/20/2013 9:07:46 AM

Thule Doubletrack Hitch Bike Rack Review - 2013 Chrysler Town and County- Video

Today on our 2013 Chrysler Town and Country, well be test fitting the Thule Doubletrack Platform-Style 2 Bike Carrier, part number TH990XT. To being our test fit, well slide the shank of the carrier into the opening of the hitch, align up our pinholes, thread our anti-rattle bolt through the pinholes and tighten with a wrench. With the platform folded down, we can now have access to our cargo area. To load the bike, well unfold the mast by sliding the grey lever over to the right hand side, put the frame hooks to the top of the mast and well undo the cradle straps. Well set the bike into the wheel cradles, adjust the frame hook tightly against the frame and secure it with the straps. The completes todays test fit for the Thule Doubletrack Platform-Style 2 Bike Carrier, part number TH990XT on our 2013 Chrysler Town and Country. more

Watch Video

2/20/2013 9:07:43 AM

Yakima DoubleDown Ace Hitch Bike Rack Review - 2013 Chrysler Town and Country- Video

Today on our 2013 Chrysler Town and Country, well be test fitting the Yakima DoubleDown Ace 4 Bike Carrier, part number Y02451. Now to being our test fit, well slide the shank of the carrier into the opening of the hitch, align up our pinholes, insert our pin through our pinhole and tighten down the black knob to engage our anti-rattle device. Well now go ahead and go over a few clearance measurements to see how the bike carrier and this vehicle will fit together. Theres about 10 inches of ground clearance. The closet part of the vehicle to the closet part of the carrier is about 4 inches. With the cradle arms folded down, weve added about 11 inches to the overall length of the vehicle. more

Watch Video

2/15/2013 11:55:26 AM

Thule Hitching Post Pro Hitch Bike Rack Review - 2013 Chrysler Town and Country- Video

Today here at etrailer.com, on our 2013 Chrysler Town and Country, we'll be test fitting the etrailer exclusive, Thule Hitching Post Pro, Part Number TH934XTR. Now to begin our test fit, we'll slide the shank of the carrier into the opening of the hitch. Now, line up our pinholes, thread our anti-rattle bolt through the pinholes and tighten with the wrench. Now, we'll now go ahead and go over a few clearance measurements to see how the bike carrier and this vehicle will fit together. There is about 10 inches of ground clearance. Closest part of the vehicle to the closest part of the carrier is about 5-1/2 inches. more

Watch Video

2/15/2013 11:55:10 AM

Swagman Titan Hitch Bike Rack Review - 2013 Chrysler Town and Country- Video

Today on our 2013 Chrysler Town and Country, well be test fitting the Swagman Titan 4 Bike Carrier, part number S63410. To begin our test fit, well slide the shank of the carrier into the opening of the hitch, align up our pinholes, thread our anti-rattle bolt through the pinholes and tighten with a wrench. Now well go ahead and go over some clearance measurements to see how the bike carrier and this vehicle will fit together. There is about 11 inches of ground clearance. The closest part of the vehicle to the closest part of the carrier is about 7 inches. With the cradle arms folded down, weve added about 19 inches to the overall length of the vehicle. Well then pull the lever at the top of the mast to swing the cradle arms out and well get a measurement of 36 inches added to the overall length of the vehicle. more

Watch Video

2/15/2013 11:55:06 AM

SportRack EZ Hitch Bike Rack Review - 2013 Chrysler Town and Country- Video

Today on our 2013 Chrysler Town and Country, we'll be test fitting the SportRack 2-Bike Hitch Mounted Bike Rack for both 1-3/4 inches and 2 inch Hitches, Part Number A30901. Now to begin our test fit, using the included adapter for the 2 inch hitch, we'll slide up the shank into the hitch, line up the hitch pinhole, and install and tighten down the anti-rattle bolt. With the anti-rattle bolt tight, our bike rack is secured to the vehicle. At this point, we'll go ahead and give you a few measurements. Our ground clearance here at the back of the bike rack is 13-3/4 inches and from the closest point of the bike rack, here at the wheel cradle to the back of the vehicle is 7 inches. We'll now go ahead and unfold the bike rack platform, then open the cargo door. more

Watch Video

2/15/2013 11:55:01 AM

SportRack Escape 3 Hitch Bike Rack Review - 2013 Chrysler Town and Country- Video

Today on our 2013 Chrysler Town and Country, we'll be test fitting the SportRack Escape 3-Bike Hitch Mounted Bike Carrier for 1-3/4 inches and 2 inch Hitches, Part Number A30403. Now, with the included adapter for the 2 inch hitch already installed on our bike rack shank, we'll slide up the shank into the hitch, line up the hitch pinhole, and install and tighten down the anti-rattle bolt. With the bolt tight, our bike rack is secured to the vehicle. We'll now go ahead and give you a few measurements. Our ground clearance here at the back of the bike rack measures 10-3/4 inches and from the closest point of the bike rack, here at the mast, to the back of the vehicle here at the mast, measures 6 inches. We'll now pull the the pin here at the bottom of the mast and tilt the mast out of the way, where we can then open our cargo door. more

Watch Video

2/15/2013 11:54:58 AM

Softride Dura Hitch Bike Rack Review - 2013 Chrysler Town and Country- Video

Today on this a 2013 Chrysler Town and Country, we'll be test fitting the Softride Dura Parallelogram Tilting 4-Bike Carrier, Part Number SR25647. Now to begin our test fit, we'll slide the shank of our carrier into the opening of the hitch, line up our pinholes, thread our anti-rattle bolt through the pinholes and tighten with a wrench. Now, we'll go ahead and go over a few clearance measurements to see how the bike carrier and this vehicle will fit together. There was about 10 inches of ground clearance. Closest part of the vehicle to the closest part of the carrier is about 2 inches. We've added about 35 inches to the overall length of the vehicle. more

Watch Video

2/15/2013 11:54:55 AM

Kuat Sherpa Hitch Bike Rack Review - 2013 Chrysler Town and Country- Video

Today on our 2013 Chrysler Town and Country we'll be test fitting the Kuat Sherpa folding, tilting platform style two bike carrier, part number S102. Now to begin our test fit using the included adapter for the two inch hitch we'll slide the bike rack shank into the hitch, line up the hitch pin holes, and slide int eh hitch pin. We can then move to the back of the shank where we'll tighten the knob down securing our bike rack to the vehicle. At this point we'll give you a few measurements. Our ground clearance at the bike rack measures 11 1/2 inches. From the closest point of the bike rack with the platform in the stored position to the back of the vehicle is one inch. more

Watch Video

2/15/2013 10:42:03 AM

Hollywood Racks Traveler 5 Hitch Bike Rack Review - 2013 Chrysler Town and Country- Video

Today on our 2013 Chrysler Town and Country, well be test fitting the Hollywood Racks Traveler 5 Bike Carrier, part number HR9200. Now to being our test fit, well slide the shank of the carrier into the opening of the hitch, align up our pinholes, thread our anti-rattle bolt through the pinholes and tighten with a wrench. Now well go ahead and go over a few clearance measurements to see how the bike carrier and this vehicle will fit together. There is about 10 inches of ground clearance. The closest part of the vehicle to the closet part of the carrier is about 11 inches. With the cradle arms folded down, weve added about 14 inches to the overall length of the vehicle. Well then turn the black knobs at the left and right side of the carrier to swing the cradle arms out and well get a measurement of 39 inches added to the overall length of the vehicle with the cradle arms are folded out. more

Watch Video

2/15/2013 10:41:59 AM

Hollywood Racks Traveler Hitch Bike Rack Review - 2013 Chrysler Town and Country- Video

Today on our 2013 Chrysler Town and Country, we'll be test fitting the Hollywood Rack Traveller, 4-Bike Carrier, Part Number HR8500. Now to begin our test fit, we'll slide the shank of the carrierinto the opening of the hitch, we'll line up the pinhole, thread our anti-rattle bolt through the pinholes and tighten with the wrench. Now, we'll now go ahead and go over a few clearance measurements to see howthe bike carrier and this vehicle will fit together. There is about 11inches of ground clearance. Closest part of the vehicle to the closest partof the carrier is about 5 inches. With the cradle arms folded down,we've added about 7 inches to the overall length of the vehicle. more

Watch Video

2/15/2013 10:41:56 AM

Thule Hitching Post Pro Hitch Bike Rack Review - 2009 Chrysler Town and Country- Video

Today on our 2009 Chrysler Town and Country, well be test fitting the Thule Hitching Post, part number TH934XTR. And to being our test fit, well simply slide our bike rack shank into the hitch and lineup the hitch pin hole and install and tighten down our anti-rattle bolt. With our anti-rattle bolt tight, our bike rack is secured to the vehicle. Now well go ahead and give you a few measurements. Our ground clearance at the bike rake is 11 and a quarter inches and from the closest point of the bike rake to the back of the vehicle is four and a half inches. Well now go ahead and pull the pin at the bottom of the bike rack mast to allow the mast to tilt down. more

Watch Video

12/19/2012 9:33:32 AM

Thule Vertex 4 Hitch Bike Rack Review - 2010 Chrysler Town and Country- Video

Today on our 2010 Chrysler Town and Country, were going to test fitting the Thule Vertex 4-Bike Carrier, part number th9029. We begin our test fit with a 2-inch adapter already installed on the bike rack shank, go ahead and slide the shank into the hitch, line up the hitch pin hole and install and tighten down our anti-rattle bolt. With the bolt tight, our bike rack is secured to the vehicle. Well now go ahead and give you some measurements. Our ground clearance at the bike rack is 11 inches, and from the closest point of the bike rack to the back of the vehicle is 1 inch. We can now pull the hitch switch at the bottom of the mast which will allow us to bring the mast down. more

Watch Video

11/26/2012 1:08:13 PM

Thule Hitching Post Pro Hitch Bike Rack Review - 2010 Chrysler Town and Country- Video

Today on our 2010 Chrysler Town and County, well be test fitting the Thule Hitching Post Pro Pulling and Tilting 4-Bike Rack with Anti-Sway Cradle, part number th934xtr. Now, to begin our test fit, using the included adaptor, well slide the bike rack shank into the hitch, line up the hitch pin hole, and install and tighten down our anti-rattle bolt. With the bolt tight, our bike rack is secured to the vehicle. Well now go ahead and give you a few measurements. Our ground clearance here at the bike rack is 10 inches, and from the closest point of the bike rack to the back of the vehicle, theres 4 inches. Well now go ahead and pull the pin here at the base of the bike rack mast, which will allow us to tilt the mast down. more

Watch Video

11/26/2012 1:08:10 PM

  1