bing tracking image

2007 Chevrolet Suburban Hitch Bike Racks Installation And Review Videos

     

Thule Hitching Post Pro Hitch Bike Rack Review - 2007 Chevrolet Suburban- Video

Thule Hitching Post Pro Hitch Bike Rack Review - 2007 Chevrolet Suburban

Today on our 2007 Chevrolet Suburban, we will be test fitting the Thule Hitching Post Pro tilting 4 bike rack for inch and a quarter and two inch hitches part number TH934XTR. To begin on our test fit, we will slide the shank of our bike rack into the receiver tube of our hitch, line up our pinholes, thread in our anti rattle bolt and tighten it with the wrench. By pulling the pin at the base of the bike rack, we can tilt it away from our vehicle, giving us full access to our rear hatch. By pulling the pin at the top of our bike rack, we can extend our dual cradle arms, we'll reinsert the pin to secure those in place. With our arms secure, we'll undo our cradle straps exposing our cradles, grab our bike, place it directly onto the cradles and secure it with the three cradle straps. With our bike loaded up, we are ready for the road and that will complete today's test fit of the Thule Hitching Post Pro part number TH934XTR on our 2007 Chevrolet Suburban. . more


Watch Video

2/4/2014 3:07:52 PM



Thule Helium Aero Hitch Bike Rack Review - 2007 Chevrolet Suburban- Video

Thule Helium Aero Hitch Bike Rack Review - 2007 Chevrolet Suburban

Today on our 2007 Chevy Suburban, we will be test fitting the Thule Helium Aero, a tilting two bike rack for an inch and a quarter and two inch hitches, part number TH9042. To begin our test fit, we'll slide the shank of our bike rack into the receiver tube of our hitch, being sure that the attached pin falls under the pin hole. We will then use the black knob to engage our anti-rattle device and further secure our rack to our vehicle. With our bike rack in this position, we'll have about 21 inches of ground clearance. The closest point of the bike rack to the back of the Suburban is about an inch and three-quarter and overall, we've added about 18 and three-quarters of an inch to our vehicle. Pulling the gray handle on the top of the rack allows us to swing out our dual cradle arms. In this position, we've added about 31 and a quarter inches to the length of our car. Pulling the gray handle at the base of the rack allows the mast to tilt away from our vehicle. This will give us full access to our rear hatch. With our mast back in its upright position, we're ready to load our bike. more


Watch Video

2/4/2014 3:07:34 PM



Thule Doubletrack Hitch Bike Rack Review - 2007 Chevrolet Suburban- Video

Thule Doubletrack Hitch Bike Rack Review - 2007 Chevrolet Suburban

Today on our 2007 Chevrolet Suburban, we will be test fitting the Thule Doubletrack platform style 2 bike rack for 1-1/4-inch and 2-inch hitches, part number TH990XT. To begin our test fit, we'll slide the shank of the bike rack into the receiver tube of the hitch, line up our pin holes, thread in our anti-rattle bolt, and tighten it with a wrench. We will secure this to the vehicle using the supplied lock. With everything secure, we'll get some measurements. We have about 19-3/4 inches of ground clearance. The closest point of the rack to the back of the vehicle is about 6-1/2 inches, and overall, we've added about 11-1/2 inches to our Suburban. By pulling the gray handle at the base of the rack, it allows it to tilt away from the vehicle. In this position, at the rear of the rack, we have about 25-3/4 inches of ground clearance. The closest point of the rack to our vehicle is now about 4-1/2 inches, and overall, we've added about 31-1/2 inches to the car. In this position, we have full access to our rear hatch. more


Watch Video

2/4/2014 2:33:36 PM



Thule Apex 4 Hitch Bike Rack Review - 2007 Chevrolet Suburban- Video

Thule Apex 4 Hitch Bike Rack Review - 2007 Chevrolet Suburban

Today on our 2007 Chevrolet Suburban, we will be test fitting the Thule Apex Tilting 4 bike rack for inch and a quarter and 2 inch hitches, part number TH9025. To begin our test fit, we will slide the shank of the rack into the receiver tube of our hitch, being sure to pull out the metal lever on the passenger side to allow it to slide in. We will then turn the black knob, engaging our anti-rattle device and securing it to our vehicle.With our bike rack secure, well go over a couple measurements. Youre going to have about 20 and a half inches of ground clearance. The closest point of the rack to the back of the Suburban is about an inch and a quarter and overall, weve added about 12 and a quarter inches to the vehicle. By pulling the gray lever at the base of the rack, it allows it to tilt away from our vehicle, giving us full access to our rear hatch. We will pull the gray lever at the top of the bike rack, swinging out our dual arms. more


Watch Video

2/4/2014 2:29:24 PM



Saris Freedom Hitch Bike Racks Review - 2007 Chevrolet Suburban- Video

Saris Freedom Hitch Bike Racks Review - 2007 Chevrolet Suburban

Today on our 2007 Chevrolet Suburban we will be test fitting the Saris Freedom, a platform style 4 bike rack for two inch hitches, Part Number SA4414B. We'll begin our test fit by sliding the shank of the bike rack into the receiver tube of our hitch. We'll line up our pinholes, threading in our anti-rattle bolt and then we'll tighten it with the wrench. There is a provided clip that we'll use to secure the pin. We'll have about 20 1/4 inches of ground clearance. The closest point of the rack to the back of the Suburban is about 3 inches and overall we've added about 18 inches of length to the vehicle. Pushing the gray lever will allow us to unfold the rack into its loading position. more


Watch Video

2/3/2014 10:55:42 AM



  1