bing tracking image

Ford F-250 and F-350 Super Duty Hitch Adapters Installation And Review Videos

     

TorkLift SuperTruss Hitch Extenstion Installation - 2005 Ford F-350 Super Duty- Video

TorkLift SuperTruss Hitch Extenstion Installation - 2005 Ford F-350 Super Duty

Rate your transcript OrderClientKevin BrossRef #20534Order #TC0622249609 Today our 2005 Ford Super Duty F350 well be installing the Torklift Super Truss Hitch Extension, part number TLE1532. This will work with the previously installed Torklift Super Hitch. Now note, the Super Hitch has already been previously installed is the magnum version which has a 2 and a half inch top receiver tube. Weve got a bushing thats already inside the hitch and well slide our extension into the bushing. Well line up the hitch pin holes then install our pin and clip. Now well install the lower compression tube into the bottom of our hitch. Again, well line up the hitch pin hole, install our pin and clip. Next were going to install 2 collars; one towards the front and one towards the back of our hitch extension. more


Watch Video

8/14/2014 11:24:37 AM



Reese Titan Hitch Reducer Sleeve Review - 2013 Ford F-250- Video

Reese Titan Hitch Reducer Sleeve Review - 2013 Ford F-250

Today on our 2013 Ford F250, well be test fitting the Reese Titan Reducer Sleeve, part number 58102. Now this adapter allows you to quickly and easily convert your 2 inch hitch receiver to a 2 inch receiver, allowing you to carry ball mounts, cargo carriers, or any other 2 inch hitch receiver accessory which uses a standard 5/8 hitch pin. Well begin our test fit by sliding the adapter into the opening of our hitch. Well then slide in our 2 inch accessory, align the pinholes, and install our pin and clip, and with that, thatll complete todays test fit for the Reese Titan Reducer Sleeve, part number 58102, on our 2013 Ford F250. . more


Watch Video

9/25/2013 1:52:47 PM



  1