Hopkins Plug-In Simple Vehicle Wiring Harness Installation - 2012 Volkswagen Routan- Video
Hi there, Volkswagen owners. Today on your 2012 at Volkswagen Routan, we're gonna be taking a look at and showing you how to install Hopkins' Four-Pole Flat Trailer Connector Vehicle Wiring Harness and this is what our harness looks like installed. You're not gonna see it at all here at the back because it is designed to be hidden inside the vehicle. This will protect it from the elements. Your four-pole connector's here at the back. You gotta worry about corrosion occurring on those. more
12/29/2021 2:53:04 PM
Trailer Wiring Harness Installation - 2010 Volkswagen Routan- Video
Today on our Volkswagen Ratton, we'll be installing part number 118490, the T1 Vehicle Wiring Harness with 4 Pull Flat Trailer Connector. Now let's send it down to Jared and have him get started.Jared: Go ahead and take our T30 torx bit drive and remove the 2 fasteners located on the driver side. Go ahead and pull the tail light assembly out and back, locate the manufacturer harness and disconnect it. You'll need to pull out on the safety tab first then press the back pin in the center. Once you do so you'll be able to pull the manufacturing wiring harness straight off. Now I'll go ahead and sit our tail light assembly off to the side for installation later. Now we will take our T1 connector, go ahead and plug in our wiring harness with the male end into the female end of the manufacturing harness. more
12/9/2015 9:18:54 AM
Trailer Wiring Harness Installation - 2011 Volkswagen Routan- Video
Today on our 2011 Volkswagen Routan we will be installing the Tow Ready T-One connector trailer wiring, part number 118490. Now on this particular vehicle the cover has some slots in it and we we're able to fish the wire through it and then pull enough length out to reach the center of our hatch area to make the connections as if we we're connecting to a trailer. You will notice the weather trim is soft enough that the wires will not be crushed, but you want to keep it away from the center latch area so that you do not damage the wires when the rear hatch is closed. Now we'll go ahead and close it and show you what it looks like. Now we'll open it back up and we'll show you how the wire is stored. You can actually store the extra length in this compartment area, keeping it out of your way and from being damaged. To begin with we will raise the rear hatch. more
10/29/2014 11:55:17 AM
Filter Videos
Filter Videos
