Trailer Wiring Harness Installation - 2010 Toyota Highlander- Video
Today on our 2010 Toyota Highlander we're going to take a look at and also show you how to install the curt T-connector vehicle wiring harness with the curt T-connector vehicle wiring harness with the four pole flat trailer connector, part number is C56217. When we do need it, it's just a matter of pulling it right out just like this, we'll allow it to rest right there on that weather stripping. That'll give us good protection so it doesn't get pinched or anything like that. Then we'll just be bale to connect it right to our trailer. When we're down with it, of course, when you do close your door, make sure you don't have it around your striker here. That'll cause issues of course. Then when we're done with it, we're just going to bunch this up and slide our and slide our disk cap right over the end of it there, bring it around and that'll hold it all together nicely for us until we need it again. Now here's what our wiring kit is going to look like when we pull it out of the package. more
8/13/2016 12:41:06 PM
Trailer Wiring Harness Installation - 2010 Toyota Highlander 118449- Video
Today on this 2010 Toyota Highlander we are going to be installing wiring harness part number 118449. The first thing I want to point out about our harness is that it comes in two separate pieces. We have got the first section which has an in line fuse in the modulite box as well as the port to plug in the vehicle. This is going to plug in underneath the dash on the driver side of the vehicle. The second part of the harness plugs into the rear of the vehicle inside the rear cargo compartment and that will finalize the tow package for us. We are going to start here inside the vehicle up underneath the dash and plug our first part of the harness in place. The port is located underneath the dash just left of the brake pedal taped to the main wiring harness. All we need to do in here is plug it in line and then we see on the back side of the modulite box we have got double sided tape. We want to find a good spot up in here and adhere the box to it. 00:54 more
8/4/2010 10:51:36 AM
