Trailer Wiring Harness Installation - 2008 Toyota Highlander- Video
Today on our 2008 Toyota Highlander we're going to be taking a look at the Curt T-connector vehicle wiring harness for factory tow package, part number 56042. So here's what our wiring's going to look like when it's fully installed. It's going to give a four pole flat and the ability to plug in our trailer and have lights from our vehicle running on our trailer. And when we're not using it, it's going to stay inside the vehicle, right underneath our panel here, tucked away nicely. It will be ready whenever we need it. I do want to mention that this particular kit is for a vehicle with a factory tow prep package. Curt does make a wiring harness that has everything you need if your vehicle does not have the prep package, and you can use part number C56217. Now that we've gone over some of the features, let's show you how easy it is to install. more
4/10/2017 12:07:23 PM
Trailer Wiring Harness Installation - 2008 Toyota Highlander C56217- Video
Today on our 2008 Toyota Highlander, we're going to be showing you how to install the Curt Custom Fit T-Connector Vehicle Wiring Harness, with the 4-Pole Flat Trailer Connector. Part number C56217. Here is what our wiring kit's going to look like, that's going to be mounted underneath our dashboard. As you can see, we're going to have the single plug-in. It's going to be located between our brake and our parking brake, right here. We'll take our plug. we're going to slide it in, until we hear it click. more
4/18/2016 10:04:01 AM
Trailer Wiring Harness Installation - 2008 Toyota Highlander 118449- Video
Today on this 2008 Toyota Highlander we will be installing the wiring harness part number 118449. The first thing I want to point out with this wiring harness before we get started is that it does come in two pieces. The larger piece with the larger 10 pin port is going to plug in underneath the dash on the interior of the vehicle. The second part which contains our 4-pole end is going to plug in at the rear back in our cargo area. We are going to start off by plugging the larger section in underneath the dash first. The port underneath the dash is located just left of the brake pedal attached to the main wiring harness lead right there. Now that we have the port located we can plug our harness in line and then we want to take the modulite box and we need to adhere it to a surface underneath the dash. We have got double sided tape on the back side so we can just peel that away and just find a place to adhere it. 00:54 more
3/3/2010 12:23:30 PM
