bing tracking image

2011 Lexus RX 350 Custom Fit Vehicle Wiring Installation And Review Videos

     

Trailer Wiring Harness Installation - 2011 Lexus RX 350- Video

Trailer Wiring Harness Installation - 2011 Lexus RX 350

Speaker 1: Today on our 2011 Lexus RX350, we're gonna be showing you how to install the Tekonsha T-One vehicle wiring harness with the four-pole flat trailer connector. Part number is 118252.Now when we're ready to use our wiring, we just simply have to undo it there, and we'll have the link we need to connect to our trailer. Now to get our harness installed we wanna find our factory tow connector, that's gonna where your tow hook would have been. If you put a hitch on a lot of times, you'll get rid of this. If you look right above it, there's gonna be a small tab that sticks down. You see it located right here and there's just a little pressure clip that holds it in place. more


Watch Video

1/23/2018 11:08:44 AM



Trailer Wiring Harness Installation - 2011 Lexus RX 350 56083- Video

Trailer Wiring Harness Installation - 2011 Lexus RX 350 56083

Speaker 1: Today on our 2011 Lexus RX350, we're gonna be showing you how to install the Curt T-connector vehicle wiring harness for factory tow package. This offers a four-pole flat trailer connector. Its part number is 56083.As you can see, when not in use, the wiring is gonna store pretty neatly under the hitch here. When we're ready to use it, we just pull off that dust cover. We bring out the length we need to connect to our trailer. Now the four-pole flat that comes on the wiring harness is gonna match any standard four-pole flat on a trailer. more


Watch Video

1/10/2018 1:02:36 PM



Trailer Wiring Harness Installation - 2011 Lexus RX 350 118478- Video

Trailer Wiring Harness Installation - 2011 Lexus RX 350 118478

Today on this 2011 Lexus RX350 we're going to show you the T-one Vehicle Wiring Harness with four pull flat trailer connector. Part number: 112478. This is the parts that you get with the it. First off we're looking at T connectors; the yellow wire is for our left hand side. The T connector with the green wire and red goes over to our passenger side, or right side. This is the module that copies the signals from the T connectors and then sends out power to a four pull wire harness to add it to your trailer. more


Watch Video

5/22/2015 7:59:39 AM



  1