2012 Kia Sedona Custom Fit Vehicle Wiring Installation And Review Videos

Trailer Wiring Harness Installation - 2012 Kia Sedona- Video

Today our 2012 Kia Sedona. Were going to review and install the Curt T connector wiring harness with 4 pole trailer connector. Part number C55503. Once you have the rear hatch open, locate the tail light assemblies. They're going to be the same on the driver and the passenger side. With three Phillips head screws that we're going to need to remove to pull out the tail light assembly and locate the manufacture wiring harness. more

9/25/2015 10:01:06 AM

Trailer Wiring Harness Installation - 2012 Kia Sedona 118410- Video

Today, on this 2012 Kia Sedona, we're going to install part number 118410 from Tow Ready. First thing we need to do is go ahead and open the tail gate and get access to the tail lights to remove both of them. They'll be three screws in each light, so to remove the tail light you will pry the light away from the vehicle. We'll disconnect the wire harness from the tail light. There will be a small tab that you have to push down and then we can go ahead and release the light from the wire harness. Next, we will go ahead and take the four pole wire and run it down between the bumper cover and the body of the vehicle. more

12/3/2012 8:27:55 AM