2006 Kia Sedona Custom Fit Vehicle Wiring Installation And Review Videos

Trailer Wiring Harness Installation - 2006 Kia Sedona- Video

Today on our 2006 Kia Sedona, we'll be installing the Curt T-Connector 4-Pole Trailer Connection, part number C55503. To begin our install, we'll first open up the rear hatch. This will expose the three screws on each side to remove the taillight assemblies. We'll go ahead and remove those screws, and then pop the taillight assemblies out. Next, we'll locate the manufacturer's wiring harness that comes into the taillight assembly. Press on the locking tab for the connector and remove it from the taillight socket. more

12/19/2014 11:49:27 AM

Trailer Wiring Harness Installation - 2006 Kia Sedona 118410- Video

Today, on this 2006 Kia Sedona, we're going to install Part Number 118410 from Tow Ready. This is our T-One Wiring Harness. To start off our install, we're going to open up the back hatch and then we're going to remove the tail lights. There's three screws in each side and then we can go ahead and remove the tail light by pulling it off to the side. We'll hold the tail lights, so we can see the mounting points on the side, but you can see how the tail lights attach to the vehicle. To disconnect the wire harness, there's a small tab on the wire harness that we push down to release it then we can go ahead and pull it apart. more

3/22/2013 9:10:57 AM