Trailer Wiring Harness Installation - 2015 Jeep Wrangler Unlimited- Video
Today on our 2015 Jeep Wrangler Unlimited we'll be taking a look at and installing the Curt-T connector vehicle wiring harness with 4-pole flat trailer connector, part number C55124. First thing we're going to do on our installation of our wiring harness is go ahead and remove the driver's side rear taillight assembly. To do so there's going to be two Phillip's screws here on the inside that we're going to remove. You can leave the outward ones installed, since those are securing the cover to the light assembly here. Once you have those two removed we'll be able to pop the taillight assembly right out, just like so. Then we'll disconnect the wiring harness, press down on the tab on the bottom and pull out. Once we have it disconnected we'll go ahead and set the taillight off to the side, and bring in our wiring harness. We're going to simply plug in the same kind of connector to our factory harness. more
11/3/2015 11:26:14 AM
Trailer Wiring Harness Installation - 2015 Jeep Wrangler Unlimited 118416- Video
Today on our 2015 Jeep Wrangler Unlimited we'll be installing the Tow Ready T-One vehicle wiring harness with 4-pole flat trailer connector, part number 118416. Now to begin our install we're going to start here at the rear of the vehicle, removing the driver's taillight assembly. We'll remove the two inside screws that hold the assembly in place. Once we have the fasteners out we can go ahead and pop the taillight assembly, exposing the manufacturer's wiring underneath. Next I'm going to go ahead and remove the taillight assembly completely by pressing on the locking tab and separating the two connectors. We can take the taillight assembly and set it aside for reinstallation later. Next we're going to bring in our new wiring harness. more
4/13/2015 8:43:28 AM
