Tekonsha T-One Vehicle Wiring Harness Installation - 2006 Honda Ridgeline- Video
Today on our 2006 Honda Ridgeline, we're gonna be installing Tekonsha's T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector. This vehicle wiring harness is gonna provide you with all the necessary lighting you need for your trailer. This includes your left turn signal, right turn signal, tail lamps and brake lamps. It's an easy installation. It simply plugs directly into your factory connectors between both your passenger and driver's side taillights. So there's no cutting or splicing involved.What's nice about this harness is the control module that's included with it. more
2/19/2019 2:17:11 PM
Trailer Wiring Harness Installation - 2007 Honda Ridgeline- Video
Today on this 2007 Honda Ridgeline we're going to install part number 118400 from Curt. First step is to go ahead and lower the tailgate and remove the two screws that attach the tail lights to the vehicle on the drivers side. We'll go ahead and remove the tail lights and then disconnect the wiring harness. Now there's two little tabs. There's one tab that connects the wire harness to the body, you have to push that away to release it and one the second tab we push down and that will allow u s to pull the connector apart. We'll go ahead and repeat the same process over on the passenger side. more
1/4/2013 3:34:52 PM
Trailer Wiring Harness Installation - 2008 Honda Ridgeline- Video
Today on this 2008 Honda Ridgeline, were going to install part number C55585 from Curt. The first thing we need to do is go ahead and remove the two taillights. You have to open up the tailgate, remove the two fasteners on the inside and then we can pop the taillights loose. Then we need to disconnect the wiring harness. Theres a little tab on the end that you just push away from the connector to loosen it up. Now well go ahead and start installing the wiring harness. more
1/4/2013 1:56:13 PM
Trailer Wiring Harness Installation - 2008 Honda Ridgeline 118400- Video
Today on this 2008 Honda Ridgeline, were going to install part number 118400 from Tow Ready. The first thing we need to do is go ahead and remove the two taillights. You have to open up the tailgate, remove the two fasteners on the inside and then we can pop the taillights loose. Then we need to disconnect the wiring harness. Theres a little tab on the end that you just push away from the connector to loosen it up. Now well go ahead and start installing the wiring harness. more
1/4/2013 1:56:08 PM
Filter Videos
Filter Videos
