Trailer Wiring Harness Installation - 2011 GMC Acadia- Video
Today, on our 2011 GMC Acadia, we're going to be taking a look at and installing the Curt 4-pole T-connector Vehicle Wiring Harness, Part #C56056. First thing you want to do is open up the rear hatch so you have access to the back of the vehicle. With this nice area on the back side here, we'll set out everything that comes in your kit. As you can see, the 4-pole connector part will be here in the center. The black and yellow wire with the plug and play setup will go to the left, to the driver's side. The white and green with the plug and play setup will go to the passenger side with that ground wire as well. You also have your protective rubber cap that will go over to protect the connections here on the 4-pole once you have it on the back of your vehicle. more
7/16/2015 1:53:27 PM
Trailer Wiring Harness Installation- 2011 GMC Acadia- Video
Today we will be working on a 2011 GMC Acadia, installing Tow Ready T-One connector part number 118451. We will start by accessing the rear cargo area of the vehicle. There are two fastening points for the tail light lens that needs to be removed. We are going to do that now. We will pop the driver side tail light lens out, you can see the manufacturers connector. It may be necessary to use a small screwdriver. We are going to pry up on the locking tab and disconnect the wire. We want to do it gently to make sure we do not break the tab. :42 more
9/9/2011 6:01:23 AM
