Curt T-Connector Vehicle Wiring Harness Installation - 2009 GMC Acadia- Video
Hello neighbors. It's Brad here at etrailer and today we're installing a Curt trailer wiring harness on a 2009 GMC Acadia. So here you can see our trailer wiring installed and hanging on our hitch here, has this nice little cap. So let's take a look. As you can see, this is what's going to plug into our trailer wiring, and that's going to allow you to send the signals from your turn signals, and your brake lights and running lights to your trailer. And that's going to allow the people behind you while towing to see what you're doing and it's going to keep you safe and legal. more
11/8/2021 2:21:08 PM
Trailer Wiring Harness Installation - 2009 GMC Acadia- Video
Today on this 2009 GMC Acadia we are going to be installing part number 118451 from Tow Ready. We are at the rear of the vehicle now and we are going to be removing the driver side and passenger side tail lights. We are on the driver side right now. We are going to pop these plastic caps out that are protecting our screws so pop those off and we will have lanyard that is holding them in position. We are going to remove the bolts that are holding in our tail light. It is going to be the same on the passenger side as well. Then we are just going to pull out our tail light assembly and disconnect it. Take this tab here and pull it back and it will pop out. We are going to set the tail light aside and we are going to remove the passenger side tail light as well. 00:46 more
6/16/2010 7:27:23 AM
