2011 Ford Van Custom Fit Vehicle Wiring Installation And Review Videos

Hopkins Plug-In Simple Wiring Harness Installation - 2011 Ford Van- Video

Today on this 2011 Ford van, we're going to review and install the Hopkins Plug-In Simple Wiring Harness, part number HM11140665. This is what your wire harness looks like when it's installed on our van. This is a great component to add to your van if you don't have an existing four pole flap, because a lot of these vans do the port that's underneath the vehicle that's just not being used. Also, if the original equipment four pole has gotten corroded beyond use, you can also replace it with this part number as well.Let's cover what you get when you order this part number. First off, this is our wire harness right here that has a side that plugs into the factory port and your four pole flap on the other side. This whole wire harness is gonna be 70 inches long overall. more

12/12/2018 3:47:13 PM

Tekonsha T-One Vehicle Wiring Harness Installation - 2011 Ford Van- Video

Speaker 1: Today on our 2011 Ford van, we're going to review and install the T1 vehicle wiring harness from Tekonsha, part number 118260. This is what our four pole wire harness looks like once installed on our van. Just by itself, you could use a cap to help hold it in place. This is all one piece unit. It has traditional four pole flat on the end with built in cap to cover it, we're not using it. The whole assembly's about 50 inches long. more

12/5/2018 9:42:29 AM

Trailer Wiring Harness Installation - 2011 Ford Van- Video

Today, on this 2011 Ford Van E-350, we're going to show you Curt T-Connector Vehicle Wiring Harness with a 4-Pole Flat Trailer Connector. Part number C56020. With this part number, this is what you get. A wire harness here, this T-connector goes over to the passenger's side with the green wire, driver's with this yellow wire. We've got plenty of length of wire that comes up to the 4-pole flat. The kit also comes with zip ties to help secure the wires. more

8/8/2015 11:46:23 AM