Trailer Wiring Harness Installation - 2009 Ford Van- Video
Today on our 2009 Ford E350 Econoline van, we're going to be taking a look at and installing the Curt T-connector Wiring Harness with Four Pole Flat Trailer Connector. Part number C56020. To test our wiring connection, we'll go ahead and take the ground side and connect that to the ground side of the plug and we'll test our brown wire, which would be our running lights, we'll get a constant signal. We'll test our left turn signal, which would be the yellow wire, we'll get that alternating signal, and the passenger side, or the right turn signal which will be that green wire. Now we'll go ahead and go brake lights, which should give us a constant signal on the green and the yellow. It looks like our wiring checks out, so we'll go ahead and plug it all back up and tuck it back away in the jack stand area. Now that we've seen how the wiring works, let's go ahead and see how it's installed. We'll remove both the driver and passenger side by removing the four T15 torx bit screws located here to secure the tail lights. more
12/14/2015 3:05:46 PM