2011 Ford F-150 Accessories and Parts Installation And Review Videos

Pollak Pigtail Wiring Harness Installation - 2011 Ford F-150- Video

Today on this 2011 Ford F150 we're going to review and install the 4' pigtail wiring harness for Pollak replacement 7-pole sockets, part number PK11998. This is a good part to use in replacement of a damaged connector up here. As you can see here, this original connector here has doctored up to make it survive a day but it definitely needs to be replaced. This part is designed to hard wire into existing wire harness from the tow package and come up to the connector. It has a US car connector on the end. This part number also comes with some butt connectors to make your connections and also a ground loop, as well. Now we'll go ahead and show you how we installed the wring harness. Let's go ahead and remove a part of our existing harness so we can get to good wires that aren't damaged. more

9/28/2016 9:36:09 AM

Firestone Wireless Air Command Installation - 2011 Ford F-150- Video

Today in our 2011 Ford F-150, we'll be installing the Firestone Wireless Air Command digital gauge with compressor, part number, F2489. We'll be adding this wireless compressor set up to already existing Firestone air bag system, part number, F2525. We'll also be using the Firestone No-Drill Mounting Kit, part number, F2529. Next, we'll install the air filter into the compressor. We'll remove the cap on the compressor and then throw the air filter in being careful not to over tighten it. We'll first go ahead and start mounting the compressor to the no-drill mounting bracket.We'll go ahead and lineup the hardware with the bracket, feed the bolt and flat washer to the compressor from the bottom of the bracket up the bracket then to the compressor where we'll install the second flat washer, serrated washer and then a nut. more

1/2/2014 10:25:31 AM